Tweet
Overall
NA Pushrod
NA DOHC
Power Adder Pushrod
Power Adder DOHC
NA Pushrod
NA DOHC
Power Adder Pushrod
Power Adder DOHC
-
Last edited by JMo60; 08-29-2008, 06:07 PM.94 Grand Prix
3400- NX 75 shot, Cammotion cam, S&S headers, and a few more toys -
ATTENTION:
If you would like to be on the list, please PM me or JMo60 with the following information-
ET (please provide proof)
Engine type (pushrod or DOHC)
Engine Displacement
Engine Gen.
Vehicle Make, Model and Year
Transmission type
And of course any power adders that were used during the run in question.
Thanks,
John
-
here's my verification, mofo
hopefully i'll have a faster time in about 2 weeks. the 17th is the very last track date for this season.... and i took it off work
Cammed 3400 --> 224whp 210wtq
Cammed 3500 --> ???
1 of 5 3500 J-BodiesComment
-
here my slippage for the add to my time up theresigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
heres my slip2006 AWD TBSS 12.538 @ 106.92 1.66 60' Bolt-ons onlyComment
-
Here is mine...Comment
-
Mine :11.92 @ 122 MPH 3400 91 Cavalier Z24 Intercooled S/C. -totalled-
10.56 @ 130 MPH 3900 LZ9 87 IROC Z28 Intercooled GT4088 TurboComment
-
here's mine, i thought it would be easier then typing it all out.
if i absolutely need a picture i can dig the stuff out of the attic, but sharkey and a couple others were at the track that night and can vouch
got zap-straps?
89 Z24
13.886 @ 96.16 mph
street trim - slicksComment
-
Here's my slip
Comment
-
14.313@95.37MPH N/A
89 berettaGT 5spd
stock 3400 w/ downpipe,CAI home made,and clutch. done with street tires.
Last edited by Berettaspeed; 12-13-2007, 03:07 AM.89 BerettaGT 3400 5spd
60' 2.106 street tires
Best ET 14.313@95.37 N/A
Now Boosted
14s@109 (poor tune still rich, poor driving skills, poor owner)Comment
-
Heres my timeslip. Youll have to fix my time from 16.60 to 16.625. If you would be so kind
sigpic
1994 Oldsmobile Cultass Supreme SL
3400/Getrag 284 5spd
1995 Chevy K1500 350c.i. 5spd Z71
350/NV3500 5spd
2014 Chevrolet Malibu LSComment
-
this was a 9 psi pass after i dyno'd 358 whp and 365wtq. mind you that was street tires (225 proxes) i was hoping to turn 11's last summer after doing some good upgrades but i had issues with destroying axles and never got a chance to run it...[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
Cleaned up the thread and it looks like we have a change of ranks in the top three!!!Comment
-
Gotta fix that, I'm a power adder pushrod, NOT n/a My new setup I will hopefully be putting down 13's n/a but that slip was done on a stock 3400 with a 100 shot of nitrous.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBSComment
-
Ok, i changed the beretta... But i now need to know who was #10 in the NA pushrod. El Diablo, do you remember which one you deleted??94 Grand Prix
3400- NX 75 shot, Cammotion cam, S&S headers, and a few more toysComment
Comment