Announcement

Collapse
No announcement yet.

3400 PCM harness connector dissassembly ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3400 PCM harness connector dissassembly ?

    Does anyone know how to get the back shell off the PCM harness connector? There are two squeeze tabs on the end of the connector shell but something is hanging up in the middle near the jack screw.

    I need to swap some pin locations to adapt the harness to the PCM I will be using.

  • #2
    Originally posted by lars49 View Post
    Does anyone know how to get the back shell off the PCM harness connector? There are two squeeze tabs on the end of the connector shell but something is hanging up in the middle near the jack screw.

    I need to swap some pin locations to adapt the harness to the PCM I will be using.
    I think you have to force out the bolt.....

    1999 GLS MP90 supercharged / 2003 GL MP62 supercharged / 2004 GLS stock
    Magnuson MP90 / TOG's / 3 in. Magnaflow exhaust / MSD ignition / LS1 MAF / Racetronix pump / HP Tuners / TCE 68mm TB / 36 lb Inj
    = Best track time: 12.951 @ 104.48, 1.839 60 ft. (Beech Bend Raceway Park, 11-23-13), 50 Deg. F
    http://www.youtube.com/watch?v=hpVYZPbpPzk

    Comment

    Working...
    X