what files do i need?

[Alxsmt]

well i have an 88 beretta 2.8 (well 3400) 5spd, ECU # 01227730

what files do i need to tune with tunerpro? and data logging? what is the file type for both of them? im still learning about this stuff, so go easy on me! lol

[SappySE107]

I would try the BFUZ.bin file with the A1 xdf file in tunerpro. Im not sure on a file for scanning with tunepro as I use freescan (do a search for freescan). 410b def file in freescan (drop down box).

You will need to change the code for your EGR (flag, set to vacuum, not digital) and the speedo code, divisor and pulse per mile. Copy those off your stock chip. Stock code is 6D which is not supported too well. You will have to look in the hex code for a pattern and see where the divisor and ppm is. That or someone may have it written down.

[Alxsmt]

ok, i will start from there! thanks man

[Alxsmt]

well i got freescan, it says it cant find the specified file... i downloaded i twice to make sure it just wasnt corrupt

[SappySE107]

specified file? Im confused. It won't decompress?

[Alxsmt]

not, like when i open the program, i can see all the features it has and stuff, but i just wont load any of the ECU files or what ever im guessing

[SappySE107]

Im getting the same thing (just reinstalled it). Well this is lame.

[SappySE107]

haha, ok, figured it out. Select the com port first and then load the 410b file.

[Alxsmt]

lol sweet, i will try that!!

[Alxsmt]

ok it "worked" but still not reading anything... i even tried my friends scan tool, it couldnt connect to the vehicle or something, it was weird

[SappySE107]

is it set to interact? 50ms delay. Hit Force Data. if it doesn't move, hit it again. Both numbers should be moving.

[SappySE107]

btw, you can't use your stock chip with that.

[Alxsmt]

what do u mean i cant use a stock chip?

i will try that tomorrow though

thanks

[SappySE107]

Your stock chip is not A1 mask, which is what that code is for (and works for 91-93 DOHC as well). If you are using BFUZ now, then its fine.

[Alxsmt]

so whats different about bfuz file then the stock 2.8 file?