Announcement

Collapse
No announcement yet.

$A1 Tunerpro XDF

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • $A1 Tunerpro XDF

    Has anyone put in the time to make a complete $A1 Tunerpro XDF based on the 727_730_A1.doc?

    I've been messing around with $A1 lately for a stock 3.1L and the XDF is pretty basic, so I was thinking I might put a few hours in for a more complete $A1 XDF. That is, unless someone has already done it.

  • #2
    -Brad-
    89 Mustang : Future 60V6 Power
    sigpic
    Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

    Comment


    • #3
      Tons of stuff missing from that...
      Just at a glance, no DFCO, DE, throttle follower...

      I've got some time to kill, so I'll work on a complete XDF that will rival the completeness of GMPCM's $A1 definition.

      Comment


      • #4
        Mine is pretty complete, i'll upload a copy after work today.

        If you want it, i have the ARUR dissassembly posted on v6z24.com in the tuning FAQ sticky.
        Past Builds;
        1991 Z24, 3500/5 Spd. 275WHP/259WTQ 13.07@108 MPH
        1989 Camaro RS, ITB-3500/700R4. 263WHP/263WTQ 13.52@99.2 MPH
        Current Project;
        1972 Nova 12.73@105.7 MPH

        Comment


        • #5
          I've seen the ARUR disassembly, good stuff.
          I have 4 days off starting tomorrow, so I'll have lots of time to work, but I'd still like to see what you have Dave.

          Comment


          • #7
            I've got one that's called A11 that's about as complete as I've seen one. Professionally written by the looks of it, and while other xdfs I was using couldn't help me set a rev limiter correctly, this one could. I could upload it if you guys need it.
            I may own a GTO now, but I'm still a 60V6er at heart.

            Comment


            • #8
              Originally posted by discostu View Post
              Tons of stuff missing from that...
              Just at a glance, no DFCO, DE, throttle follower...

              I've got some time to kill, so I'll work on a complete XDF that will rival the completeness of GMPCM's $A1 definition.
              Can't wait to see that!! Keep us updated and good luck.
              Andy

              sigpic

              fastest 1/8: 10.19@ 67.17
              fastest 1/4: 16.16@ 82.70

              62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.

              Comment


              • #9
                Originally posted by torq455 View Post
                Can't wait to see that!! Keep us updated and good luck.
                Will do...
                I actually didn't get much done on my days off, I got called in to work, and I did a bit of tuning of my own, working on getting better MPG from my car. I shouldn't complain, I get ~20MPG all city driving, but if I can squeeze out an extra couple MPGs it would be great.

                But I'll definitely keep you guys posted.

                Comment


                • #10
                  Originally posted by OldSkoolGP View Post
                  I've got one that's called A11 that's about as complete as I've seen one. Professionally written by the looks of it, and while other xdfs I was using couldn't help me set a rev limiter correctly, this one could. I could upload it if you guys need it.
                  Please do.

                  Thanks!

                  -- Scott

                  Comment


                  • #11
                    dave, is that stock settings or your tune?
                    sigpic
                    88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

                    77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

                    Comment


                    • #12
                      Originally posted by Alxsmt View Post
                      dave, is that stock settings or your tune?
                      in the thread on V6?

                      those are the stock Jbody .bin files..
                      Past Builds;
                      1991 Z24, 3500/5 Spd. 275WHP/259WTQ 13.07@108 MPH
                      1989 Camaro RS, ITB-3500/700R4. 263WHP/263WTQ 13.52@99.2 MPH
                      Current Project;
                      1972 Nova 12.73@105.7 MPH

                      Comment


                      • #13
                        yeah on the other forum

                        thanks
                        sigpic
                        88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

                        77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

                        Comment


                        • #14
                          any word on that complete A1.XDF?
                          Andy

                          sigpic

                          fastest 1/8: 10.19@ 67.17
                          fastest 1/4: 16.16@ 82.70

                          62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.

                          Comment


                          • #15
                            all the important stuff is mapped in the one i have posted.. any of the other stuff isn't worth changing or messing with.. lol
                            Past Builds;
                            1991 Z24, 3500/5 Spd. 275WHP/259WTQ 13.07@108 MPH
                            1989 Camaro RS, ITB-3500/700R4. 263WHP/263WTQ 13.52@99.2 MPH
                            Current Project;
                            1972 Nova 12.73@105.7 MPH

                            Comment

                            Working...
                            X