Announcement

Collapse
No announcement yet.

Valve comparison on the flowbench

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Valve comparison on the flowbench

    We used to have copies of the OEM valves available, but these days they are all based on a different design for some reason, which hurts flow. I was able to modify this one to be back to stock so its not hopeless, but needs to be addressed if you want to keep performance. Based on a stock 3500 head. Supporting wot-tech is greatly appreciated.

    EVCchart2.jpg EVCchart.jpg
    Attached Files
    Ben
    60DegreeV6.com
    WOT-Tech.com

  • #2
    Very nice!
    -Brad-
    89 Mustang : Future 60V6 Power
    sigpic
    Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

    Comment


    • #3
      Testing intakes now Bit more work though since the 3400 vs 3500 port design is significant. Need to check both with the same valve work.
      Ben
      60DegreeV6.com
      WOT-Tech.com

      Comment

      Working...
      X