Announcement

Collapse
No announcement yet.

OBD2 Inspection/Maintenance Procedure

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • OBD2 Inspection/Maintenance Procedure

    A new page entry has been added:

    [drupal=138]OBD2 Inspection/Maintenance Procedure[/drupal]

    Inspection/Maintenance (I/M) Complete System Set Procedure

    Description

    The purpose of the I/M Complete System Set Procedure is to satisfy the enable criteria necessary to execute all of the I/M readiness diagnostics, and complete the trips for those particular diagnostics. When all diagnostic tests are completed, the I/M System Status indicators are set to YES. Perform this test when more than one or all of the I/M System Status indicators are set to NO.


    Conditions for Running

    Cold Start


    <ul> The barometric pressure is more than 65 kPa.</p>
    Ben
    60DegreeV6.com
    WOT-Tech.com
Working...
X