Ok, I'm not going to post pictures in this thread, because it will kill the bandwidth and hurt 56Kers. I'll post a link to a picture of each item instead.
Give me your best offer on all items, unless you see "firm" next to the price listed.
Prices do not include shipping unless otherwise stated.
First come first serve!
There is a lot of stuff here, so take your time and read through/click on all the pictures.
Here we go:
Beretta Items
GTU Front GFX (white): $100 firm. Needs a little work, but it is definately fixable. There are 3 small cracks in it, and 3 mounting tabs broken off (which can be repaired as well). Any bodyshop can do this work, or you can tackle it yourself. It's not hard, but it takes more time than I have to allow right now.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00127.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00128.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00129.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00130.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00131.jpg
GTU Rear spoiler (white): $50. Needs to be painted, but it's in good shape. All mounting studs are intact. 3rd brake lense is intact, but the brake light assembly is not there (perfect for a custom LED brake light). Nuts (not shown) will be included.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00132.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00134.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00133.jpg
Indy rear GFX (teal): $15. The passenger side is fine, but the driver side is a bit warped due to the heat from the exhaust. You could just cut the damaged section out, and patch it up with fiberglass.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00140.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00139.jpg
GTU/Indy side GFX mounting brackets: $15. All but two brackets are here; two of the ones on the car were too damaged to salvage. You can easily make your own brackets though, just copy the design of the brackets from the first picture. As many of the screws/bolts that I could get off the car come with the brackets.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00126.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00125.jpg
European Beretta reflectors: $15. These are the thin red strips that separate the top and bottom halves of the tail lamps. I took these off when I installed my Euro tails back in 2001, and they've been sitting in storage since.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00118.jpg
GTZ/Z26 foglights: $30. The lenses have no cracks in them, and they never collected moisture when they were on my car. These are JUST the housings; the mounting brackets are not included. H3 bulbs are already installed (not sure if they are still good or not, but they worked when I removed these).
http://i72.photobucket.com/albums/i162/grm...ms/DSC00108.jpg
3x00 K&N WAI: $30. This is the intake I had on my car prior to getting a Tranzgenic unit. Tapered K&N Cone with a 3" pipe connected to it. Includes rubber coupling and 2 hose clamps to secure to the throttle body.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00141.jpg
FE7 swaybar bushings: $10. These are polyurethane bushings, brand new never used. I believe you may have to bend the brackets a bit to fit these to the subframe, but that's the only modification needed. Size is 17mm.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00106.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00107.jpg
Speedhut Reverse EL gauges for GTZ/Z26: $30. These are already mounted on a GTZ/Z26 gauge cluster face, and include a carbon fiber overlay. The vinyl on the overlay is a bit wrinkled on the corners, but when assembled in the cluster, you can't really see the wrinkles. They light up blue; comes with the controller and is a simple hookup (positive and negative hookup). The cluster face is silver.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00135.jpg
Hypertech 160º thermostat: $10. Brand new never used, fits 2.8/3.1/3100/3400, possibly even 2.0's and 2.2's.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00136.jpg
Indy mirror bezels: $10. Came off the Teal Indy I got the rear GFX from. I think these are the same as other models, but I can't remember.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00123.jpg
3x00 belt tensioner: $20. Came off my 3400, has 22K on it. Excellent condition, it's not separated. These are $60 new at the dealer. May work with 2.8/3.1 engines, not sure if it will or not though.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00117.jpg
3400 2000+ EGR adapter: $30 firm. This is a special piece made by McGavin Motorsports, made for use on the side-mount EGR's.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00116.jpg
3400 rear exhaust manifold: $50. This manifold flows a little better than a 3100 manifold due to it's somewhat tubular design. Includes EGR neck and both heatshields. Came from a 99 3400.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00103.jpg
GTZ/Z26 left turn-signal lense: $10. Good shape, has a slight crack that you can see in the picture, but can barely see when installed. DOES NOT LEAK! Amber in color.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00109.jpg
93-96 grey kickpanels: $15. Driver side a bit dirty, may clean up. Otherwise in pretty decent shape.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00105.jpg
88-91 GM Front brake lines (flex lines): $20. These were pulled off Ribz's car when I converted his car to 92+ brakes; these have about 10K miles on them and are in excellent condition. These are GM flex hoses, not Autozone ones or aftermarket junk.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00111.jpg
E-brake plastic: $5 each. This is the plastic piece inside the E-brake handle that has the button you push to release the brake, and the spring. Sometimes these break and need to be replaced, so here are two of them.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00110.jpg
Strut plates/mounts: $20. I don't remember which model/year these came from, but I believe these are for the FE7 setups from 90 and 91. The rubber mounts and metal hats are included. Part numbers are stamped/molded into the pieces, so you can call up the dealership and find out if these will work with your car. These pieces are brand new.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00115.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00114.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00113.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00112.jpg
3x00 exhaust manifold gasket: $10. Gasket is brand new still in packaging.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00120.jpg
Other Car items
96-98 Grand Am foglights: $20. Good condition, not cracked.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00138.jpg
96-98 Grand Am door tweeters: $15. These mount up in the corners of the doors by the mirrors, where the adjustment knobs are on Berettas. Dark Grey in color, includes a few inches of wiring.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00124.jpg
88-93 Grand Prix Heads Up Display: $40. Came from a Grand Prix; could be custom mounted. Has not been tested, not guaranteed to work.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00119.jpg
88 Cutlass Supreme Convertible tonneau cover: $50. This cover is extremely rare; it came from a Convertible replica of the Quad 4 turbo Pace car. It was stored in the trunk, and is not weathered at all! No cracks, no tears, no rips, no stains, nothing! Practically brand new. Could be used as a custom fit job as well. Dark grey in color.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00099.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00100.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00101.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00102.jpg
Miscellaneous
PS2 controller: $15. This is the nice controller that has the vibration mode, and the two thumb joysticks. Barely used.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00137.jpg
Give me your best offer on all items, unless you see "firm" next to the price listed.
Prices do not include shipping unless otherwise stated.
First come first serve!
There is a lot of stuff here, so take your time and read through/click on all the pictures.
Here we go:
Beretta Items
GTU Front GFX (white): $100 firm. Needs a little work, but it is definately fixable. There are 3 small cracks in it, and 3 mounting tabs broken off (which can be repaired as well). Any bodyshop can do this work, or you can tackle it yourself. It's not hard, but it takes more time than I have to allow right now.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00127.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00128.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00129.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00130.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00131.jpg
GTU Rear spoiler (white): $50. Needs to be painted, but it's in good shape. All mounting studs are intact. 3rd brake lense is intact, but the brake light assembly is not there (perfect for a custom LED brake light). Nuts (not shown) will be included.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00132.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00134.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00133.jpg
Indy rear GFX (teal): $15. The passenger side is fine, but the driver side is a bit warped due to the heat from the exhaust. You could just cut the damaged section out, and patch it up with fiberglass.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00140.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00139.jpg
GTU/Indy side GFX mounting brackets: $15. All but two brackets are here; two of the ones on the car were too damaged to salvage. You can easily make your own brackets though, just copy the design of the brackets from the first picture. As many of the screws/bolts that I could get off the car come with the brackets.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00126.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00125.jpg
European Beretta reflectors: $15. These are the thin red strips that separate the top and bottom halves of the tail lamps. I took these off when I installed my Euro tails back in 2001, and they've been sitting in storage since.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00118.jpg
GTZ/Z26 foglights: $30. The lenses have no cracks in them, and they never collected moisture when they were on my car. These are JUST the housings; the mounting brackets are not included. H3 bulbs are already installed (not sure if they are still good or not, but they worked when I removed these).
http://i72.photobucket.com/albums/i162/grm...ms/DSC00108.jpg
3x00 K&N WAI: $30. This is the intake I had on my car prior to getting a Tranzgenic unit. Tapered K&N Cone with a 3" pipe connected to it. Includes rubber coupling and 2 hose clamps to secure to the throttle body.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00141.jpg
FE7 swaybar bushings: $10. These are polyurethane bushings, brand new never used. I believe you may have to bend the brackets a bit to fit these to the subframe, but that's the only modification needed. Size is 17mm.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00106.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00107.jpg
Speedhut Reverse EL gauges for GTZ/Z26: $30. These are already mounted on a GTZ/Z26 gauge cluster face, and include a carbon fiber overlay. The vinyl on the overlay is a bit wrinkled on the corners, but when assembled in the cluster, you can't really see the wrinkles. They light up blue; comes with the controller and is a simple hookup (positive and negative hookup). The cluster face is silver.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00135.jpg
Hypertech 160º thermostat: $10. Brand new never used, fits 2.8/3.1/3100/3400, possibly even 2.0's and 2.2's.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00136.jpg
Indy mirror bezels: $10. Came off the Teal Indy I got the rear GFX from. I think these are the same as other models, but I can't remember.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00123.jpg
3x00 belt tensioner: $20. Came off my 3400, has 22K on it. Excellent condition, it's not separated. These are $60 new at the dealer. May work with 2.8/3.1 engines, not sure if it will or not though.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00117.jpg
3400 2000+ EGR adapter: $30 firm. This is a special piece made by McGavin Motorsports, made for use on the side-mount EGR's.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00116.jpg
3400 rear exhaust manifold: $50. This manifold flows a little better than a 3100 manifold due to it's somewhat tubular design. Includes EGR neck and both heatshields. Came from a 99 3400.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00103.jpg
GTZ/Z26 left turn-signal lense: $10. Good shape, has a slight crack that you can see in the picture, but can barely see when installed. DOES NOT LEAK! Amber in color.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00109.jpg
93-96 grey kickpanels: $15. Driver side a bit dirty, may clean up. Otherwise in pretty decent shape.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00105.jpg
88-91 GM Front brake lines (flex lines): $20. These were pulled off Ribz's car when I converted his car to 92+ brakes; these have about 10K miles on them and are in excellent condition. These are GM flex hoses, not Autozone ones or aftermarket junk.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00111.jpg
E-brake plastic: $5 each. This is the plastic piece inside the E-brake handle that has the button you push to release the brake, and the spring. Sometimes these break and need to be replaced, so here are two of them.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00110.jpg
Strut plates/mounts: $20. I don't remember which model/year these came from, but I believe these are for the FE7 setups from 90 and 91. The rubber mounts and metal hats are included. Part numbers are stamped/molded into the pieces, so you can call up the dealership and find out if these will work with your car. These pieces are brand new.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00115.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00114.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00113.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00112.jpg
3x00 exhaust manifold gasket: $10. Gasket is brand new still in packaging.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00120.jpg
Other Car items
96-98 Grand Am foglights: $20. Good condition, not cracked.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00138.jpg
96-98 Grand Am door tweeters: $15. These mount up in the corners of the doors by the mirrors, where the adjustment knobs are on Berettas. Dark Grey in color, includes a few inches of wiring.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00124.jpg
88-93 Grand Prix Heads Up Display: $40. Came from a Grand Prix; could be custom mounted. Has not been tested, not guaranteed to work.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00119.jpg
88 Cutlass Supreme Convertible tonneau cover: $50. This cover is extremely rare; it came from a Convertible replica of the Quad 4 turbo Pace car. It was stored in the trunk, and is not weathered at all! No cracks, no tears, no rips, no stains, nothing! Practically brand new. Could be used as a custom fit job as well. Dark grey in color.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00099.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00100.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00101.jpg
http://i72.photobucket.com/albums/i162/grm...ms/DSC00102.jpg
Miscellaneous
PS2 controller: $15. This is the nice controller that has the vibration mode, and the two thumb joysticks. Barely used.
http://i72.photobucket.com/albums/i162/grm...ms/DSC00137.jpg
