Announcement

Collapse
No announcement yet.

UIM inlet tube

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • UIM inlet tube

    If you have a GrandAm/Alero 3400 upper intake and need to add an inlet tube for any reason, here is a cheap, easy way to do it:



    That is a cast aluminum "post-top mount" available at Home Depot. Just widen 2 of the 4 mounting holes a little bit, trim off or shorten what is not needed. ~2.5 I.D. For about $8.00. Part#7784-01B
    1999 GLS MP90 supercharged / 2003 GL MP62 supercharged / 2004 GLS stock
    Magnuson MP90 / TOG's / 3 in. Magnaflow exhaust / MSD ignition / LS1 MAF / Racetronix pump / HP Tuners / TCE 68mm TB / 36 lb Inj
    = Best track time: 12.951 @ 104.48, 1.839 60 ft. (Beech Bend Raceway Park, 11-23-13), 50 Deg. F
    http://www.youtube.com/watch?v=hpVYZPbpPzk

  • #2
    and what size it that Greg ?

    Comment


    • #3
      Originally posted by unchained01 View Post
      and what size it that Greg ?
      It comes 2 inch depth, about 2 7/8 outside diameter, 2 1/2 inside. I was able to use a 3 inch silicone coupler on it
      1999 GLS MP90 supercharged / 2003 GL MP62 supercharged / 2004 GLS stock
      Magnuson MP90 / TOG's / 3 in. Magnaflow exhaust / MSD ignition / LS1 MAF / Racetronix pump / HP Tuners / TCE 68mm TB / 36 lb Inj
      = Best track time: 12.951 @ 104.48, 1.839 60 ft. (Beech Bend Raceway Park, 11-23-13), 50 Deg. F
      http://www.youtube.com/watch?v=hpVYZPbpPzk

      Comment


      • #4
        Thanks Greg !!

        Comment

        Working...
        X