WTB 60deg V6 Hyd Roller Lifters

[Blazer406]

Well, then I have a set from a 3500 if they will work. Have 23k miles on them and I bought the engine for the top end, so it was running good when dissasembled.

I can measure the length on Mon for you.

Best I can tell... the 3500 is a close cousin to the Northstar... and is also a 90 deg V6... and DOHC...I don't think they are in the same engine family....

1999-2002 Oldsmobile Intrigue
2001-2002 Oldsmobile Aurora

I don't think they are in the same family as the 3.1L and 3.4L.... unless someone can shed some additional light.....

[bszopi]

You are thinking of the Olds 3.5L, NOT the 3500.

[Blazer406]

You are thinking of the Olds 3.5L, NOT the 3500.

What year, make, and model did the engine come in?

edit: Looking at the 60 DEG V6 Family Tree on here.....I see in '04... the 3500 in the Malibu... but when I look up replacement lifters for this motor at Advance Auto Parts..... the lifters show up as flat tappet.... not roller tappet....???

[bszopi]

Goto the AutoZone website and do a search. I came up with a Melling hydraulic roller lifter, PN JB-2270, with a price of $15.99 each.

http://www.autozone.com/R,APP94190/vehicleId,2968801/initialAction,partProductDetail/store,3858/partType,00057/shopping/partProductDetail.htm

[Blazer406]

Goto the AutoZone website and do a search. I came up with a Melling hydraulic roller lifter, PN JB-2270, with a price of $15.99 each.

http://www.autozone.com/R,APP94190/v...ductDetail.htm

That site comes up with the correct lifter.... however... advance auto parts, napa, or oreilly's can confirm this. They are slacking I guess.... I was already doubting advance's site because they were showing a mechanical tappet.... I would think all OEM's were roller at this point......