Tweet
WTB 3.4 DOHC Cams. 1997 or close to that year. I really only need the rear exhaust cam. But most people don't want to break the set. Which I understand.
-
1997 Z34 Monte,: testing 4 exh cam\'s, RSM STB, K&N, Eagle077 245/40/ZR18 Nitto Extreme
1972 3/4 ton 4X4 longbed, built 350, 400 auto, 6\" spring lift, 35\" AT/BFG\'s, dana 60 front axle, 14 bolt gm w/detroit locker 4.56 gears. My ricer smasher
-
hey, your best bet then is to call a junkyard. they charge about 50 bux a cam. also 97 will may be the only year i think u can interchange with. unless u get a set of older cams and bolt them on but unless u get a 96 set, u will have to get the drive gear as well. a guy on pff said the lobes are different on those cams b/c of the smaller lifters(like thinner or something like that).
i can check the junkyard next time i go there. i can probably get u a set of banks for about 85 but shipping will be high.The Official Rotating Mass Nazi -
Ya that was my post about them being narrower. (at least on mymonte.com) But they will work. There's about 0.010 difference in width. I was hoping to get something a little closer then you. But thanks for offering. If none turn up. I'll still take you up on the cams and carriers we talked about.Originally posted by dohcfiend1997 Z34 Monte,: testing 4 exh cam\'s, RSM STB, K&N, Eagle077 245/40/ZR18 Nitto Extreme
1972 3/4 ton 4X4 longbed, built 350, 400 auto, 6\" spring lift, 35\" AT/BFG\'s, dana 60 front axle, 14 bolt gm w/detroit locker 4.56 gears. My ricer smasherComment
-
oh that was you? well then i guess u know for sure then
The Official Rotating Mass NaziComment
Comment