Tweet
my 3100 kick a rod. in my 94 grand prix.i was woundering wiring would i have to do to put a 96+ 3100 in it
-
-
Depending on how new you were thinking, the only problems should be the temp sensor and the EGR valve. Whiich are no big deal to deal with. -
Swap over your UIM from the 94 and that will take care of the EGR issue. Possibly wire in a 3 wire CTS in the lower intake as I think in 96 is when they did away with the one in the rear head for the gauge and moved to a 3 wire that did both gauge and ecm.[URL="http://isaachayes.60degreev6.com/"][SIGPIC][/SIGPIC][/URL][SIZE=1][COLOR="RoyalBlue"][/COLOR][URL="http://isaachayes.60degreev6.com/z26/ss-todo.htm"][IMG]http://isaachayes.60degreev6.com/z26/signature1.jpg[/IMG][/url] [COLOR="#FF4000"]New 2010 project (click image)[/COLOR]
1994 3100 BERETTA. 200,000+ miles
[/SIZE] [SIZE=1]16.0 1/4 mile when stock. Now ???[/SIZE] [SIZE=1][U]
Original L82 Longblock[/U] with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
[/SIZE]Comment
-
or should i swap 3400 in it trany almost has 200k on it can my 1.5OBD run a 3400 good and how about the exhaust can i use my 3100 manifold or do i need a 3400 manifold.Comment
-
3400 is pretty simple swap. you can run it un-tuned it will do ok, more power is to be had tuned but plenty have swapped. keep your original injeactors and FPR. www.3400swap.com should cover the rest.[URL="http://isaachayes.60degreev6.com/"][SIGPIC][/SIGPIC][/URL][SIZE=1][COLOR="RoyalBlue"][/COLOR][URL="http://isaachayes.60degreev6.com/z26/ss-todo.htm"][IMG]http://isaachayes.60degreev6.com/z26/signature1.jpg[/IMG][/url] [COLOR="#FF4000"]New 2010 project (click image)[/COLOR]
1994 3100 BERETTA. 200,000+ miles
[/SIZE] [SIZE=1]16.0 1/4 mile when stock. Now ???[/SIZE] [SIZE=1][U]
Original L82 Longblock[/U] with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
[/SIZE]Comment
-
im going to go with 00' 3400. just ordered egr adapter from wot-tech.
im going leave stock for now. I'm going to upgrade it later. My Q. can i put ls6 springs on a stock motor.Last edited by z-man350; 11-22-2008, 09:16 PM.Comment
Comment