Tweet
i did a head gasket head change and now the car idles erraticly after it warms up.. my question is does the pcv tube where it connects to the intake manifold have a rubber grommet or is it loosely in there?? because it seems to cure my problem when i put pressure on that point.. any input would be appreciated.
-
-
Use a little gasket sealer around it.[SIGPIC][/SIGPIC]
1992 Buick Skylark 2.3L 1996 GrandAm 3100 SFI 1996 Ford E150 Conversion 5.8L -
the tube is probably rock hard by now, you should be able to get a replacement tube from an auto parts place that will seal much better.Past Builds;
[url=http://www.v6z24.com/registry/SuperDave]1991 Z24, 3500/5 Spd. 275WHP/259WTQ 13.07@108 MPH[/url]
[url=http://www.v6z24.com/registry/superdave/5]1989 Camaro RS, ITB-3500/700R4. 263WHP/263WTQ 13.52@99.2 MPH[/url]
Current Project;
[url=http://www.v6z24.com/registry/superdave/6]1972 Nova 12.73@105.7 MPH[/url]Comment
-
Yes, it has a rubber grommet normally.Comment
Comment