Big Problem

[TheWhiteKnight]

Well I am currently working on my wife's 1995 3100. I went to the store to get some engine assembly lube, and when I came back, a friend of mine took all of the pushrods out of the motor. He doesn't remember which ones went where, and while I DO have replacement pushrods, and lifters here, I needed to know which ones go where. I don't want to break the heads off of the engine to find out. Can anyone help me out here?

Thanks in advance.

- Josh

[geoffinbc]

The long ones go on the exhaust valves. The short ones go on the intake valves.

[TheWhiteKnight]

The long ones go on the exhaust valves. The short ones go on the intake valves.

I know. Looking from the top of the head (remember the heads are still attached to the block) which ones are the intake and which ones are the exhaust? Is there a diagram that I can look at someplace on here bud?

Thanks again!

- Josh

[geoffinbc]

Just look into the intake ports. You can easily spot which valve is the intake valve.

[TheWhiteKnight]

Just look into the intake ports. You can easily spot which valve is the intake valve.

:: holds the big sign that says "Duh... I'm a dumbass" :: Thanks again. Sorry for the intrusion here. I'm a big Quad 4 person myself.



Thanks again!

- Josh