LS6 Valve Springs?

[zofo61]

I agree that they are the same as I have a set of LS yellows with the stock retainers and my 3500 retainers fit them the same way with the same amout of movement. If I lay them side by side you cannot tell the difference between them. I'm using the stock 3500 retainers on the Comp Cams 26986 springs that I got from Ben. Real nice springs that fit over the stock 3500 oil seals/seats that came with the headgasket set. No need to buy any other seats or cavi seals. Just like it should be, no problem-no hassle.

Thanks for the info.....but for the price of the Comp springs ...I will die grind some Shims and get the Cavi seals.........that whole combo is less than half the Comps.........Glad to know that the LS6 retainers are the same though..............I also know now not to piss off the Johnny from Mossville though thats for sure

[SappySE107]

His name is vegeta and it does a fusion with kakarot to make vegitto or gogetta (cause kakarot is Goku on earth). Meh, yeah, thats gonna get off topic:P I don't know any martial arts, unless you count what I do to 60V6 parts with a die grinder:P

[blackbombshell95]

Not trying to hijack this thread but Ben, whats with your avitar? Are you into martial arts? I have been in the arts for 30 years. 5th Dan TKD,1st Dan Kuk Sool Won. Muay Thai 8yrs. and Taiji for 10 yrs. I like to mix the hard for fighting and the soft for health.

That is a very good question and I would love to answer that on the behalf of Ben. That fighter that you see in Ben's avatar is a key character in the television series called Dragonball Z. The name of the fighter in Ben's avatar is Burter. The fighter in my avatar is from the same television series and his name is Kakarot.
To sum up this brief description of who these fighters are, Kakarot beats the living tar out of burter.
/discussion.

[johnnymossville]

Not trying to hijack this thread but Ben, whats with your avitar? Are you into martial arts? I have been in the arts for 30 years. 5th Dan TKD,1st Dan Kuk Sool Won. Muay Thai 8yrs. and Taiji for 10 yrs. I like to mix the hard for fighting and the soft for health.

[johnnymossville]

I agree that they are the same as I have a set of LS yellows with the stock retainers and my 3500 retainers fit them the same way with the same amout of movement. If I lay them side by side you cannot tell the difference between them. I'm using the stock 3500 retainers on the Comp Cams 26986 springs that I got from Ben. Real nice springs that fit over the stock 3500 oil seals/seats that came with the headgasket set. No need to buy any other seats or cavi seals. Just like it should be, no problem-no hassle.

[SappySE107]

pwned! haha. I have a box of LS retainers here:P

[Superdave]

If i remember right the LS1/6 retainers are the same as the V6 ones, they have like 1mm of play but so do the LSx spring seats.


*edit, Dammit Ben!

[SappySE107]

they are the same as ours stock vs stock.

[zofo61]

The orange and green stripes are the ones before the yellows...still LS6 and are just a tad different than the yellows.
I am asking opinions on the retainers.......has anyone used the stock LS6 retainers and if so do they fit tighter than the 60*V6 stockers...or is the only other alternative the 90.00 Comp set with Comp Locks........?

[IsaacHayes]

Everyone around here is using the yellow, not sure where the orange come from.... At least I haven't seen any 60* builds using orange...

[zofo61]

I just put in the orange striped ones. You need the LS shims, and you will need different seals, but you can use your stock keepers.

I will be using the 1991 Cavi seals....I guess my question really is....is the orange stripes as good as the yellows and

Do the LS6 retainers fit better than the stockers. The stockers have some wiggle room. The comps suposedly do not, I am questionin weather the LS6 retainers fit better than the stockers.

[Superdave]

I have a set of 3400 heads with LS6 Yellows installed sitting on the shelf, i'll see if i can get coil bind and max lift from them tonight...

[SappySE107]

I means you have to subtract .100 from their max spring spec. We know you can run LS6 springs over .500 lift though.

[zofo61]

LS1 have 1.8 install height...

And.........this is bad....good......wrong.....right?

They are LS6 springs not LS1 or is that redundant?

Thanks

[SappySE107]

LS1 have 1.8 install height...