Swap 3400 to the Pontiac Grand Prix 88 2.8

[viper83]

Hi!
My name is Siarhei and i'm novice on this forum.
Sorry for the my english - it not so good as i want

I have a Pontiac Grand Prix SE auto with a 2.8 v6 engine.

This is the car photo before rebuild starting.



Now the car is under reconstruction, but the old 2.8 engine is really bad... So i plan to swap new engine into the Pontiac. I founded a 3400 engine with transmission from the 2000 Chevrolet Impala.

Refer to the Photo below:





The engine is in good condition, so i believe the Pontiac with this engine could be the good project.

As i can see from this thread somebody already did the same swap

http://60degreev6.com/forum/showthre...peed-3400-swap

But i cannot find the details of this process.

So maybe you can help me and say, what additional parts i need? Do i need a Impala harness and impala engine ECU? Is it possible to combine Pontiac harness with Impala engine ECU?

Thanks!

[bachert24]

You can splice the harnesses together to get the desired results, but you'll need both pinouts. Sounds be able to find those easily.