I Need Help! Just Replaced Head Gasket

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • WhiteZ34
    • Jan 2005
    • 42
    #1

    I Need Help! Just Replaced Head Gasket

    I just got done replacing my head gaskets and when I went to start it, it idles at 2k and it doesn't go down either. The timing seems to be just fine. and I am fairly confident that everything is tight. Any tips would be great.

    WhiteZ34
    \'92 White Z34 - Custom Air Intake & Magnaflow Exhaust
    Tags: None
    • pepsi_coke
      • Sep 2004
      • 288
      #2
      Vaccum lines snap ?
      How bout something as so simple as the Idle Air Control valve .. or the Throttle Position Sensor ?
      New member of 200,000 mile club as of May 16, 2005

        Comment

        • bud36light
          • Nov 2003
          • 517
          #3
          Just look for a(some)vac leak(s).
          2004 Grand Am GT 3400 ... I had the right to remain silent, I just didn't have the ability.(Ron White)

            Comment

            • pepsi_coke
              • Sep 2004
              • 288
              #4
              Originally posted by WhiteZ34
              I posted earlier about how I just changed my head gaskets. It was idling at 2k but I found a vacum leak and fixed it. It idles normally now and accelerates just fine like it should. The problem now is that it has a loud clicking sound that increases with acceleration and every now and then the motor shakes a little bit. Any suggestions?
              He fixed that and now started another topic .. found here:
              http://www.60degreev6.com/index.php?...ewtopic&t=4971
              New member of 200,000 mile club as of May 16, 2005

                Comment

                Previous template Next
                Working...