my 94 will not start

[dohcfiend]

hmm.u say you replaced the crank sensor in the back of the motor? check the 2 wires that go from that sensor to the ignition module?

[napatiger]

I agree with dochfiend, check that crank sensor wiring, try to switch them, check they are wound up, check your grounds.

[Mach10]

Ah, why didn't you say so?

I'll get you the wire colors and better instructions when I get home.

[bigbadrat]

well i figured it out.i finally had time to mess with it.i figured i would try my other modgule that i had and put it on.once i seen i had spark,i knew it was going to start.well after a few cranks it fired right up.now time to put it all back together and put back on the road.