New Exhaust

[SofaKingWeToddDid]

i dont think i need anything crazy, im using ac delco plugs and oem coils. i dont really race my car, just drive the shit out of it sometimes. lol

[HayesPerformance]

Just regular wires?

[SofaKingWeToddDid]

35175
$64.76/each
is my cost. yes, new pictures. as soon as they fix my one crooked tip!! ABC does a decent job, the third time around. lol
thats also the part number for the tips i have, and MY cost on them.
my mufflers i dont have part numbers for, but its just a measurement thing really, and where the tips enter and exit.
i must have missed you dave!! lol how much can you get me some spark plug wires for? i think i need some, shes idling a little rough some times.

[RedZMonte]

new pics?

[HayesPerformance]

I think it was last sunday, Clinton

I was two car lanes over from you heading west on Stoney Plain Road. LOL

[SofaKingWeToddDid]

lol sorry i asked them on saturday, but they were too busy to look through the invoices.

[Rhedalert]

Thanks but at minimum they aren't showing on magnaflow.com unless I missed it!

[SofaKingWeToddDid]

they are magnaflow tips i got from magnaflow. i order direct. lol from engine to TIPS my system cost me $300. PLUS it was just REDONE for free today because i thought the tips stuck out too far, the pipes and mufflers all hung too low and it would rattle on something at the back.

so to fix this we got rid of the mufflers (basically resonators) and used a normal style, plus brought everything up about 2" closer to the body (making it about 1 - 2" away from it) the tips were brought in a little more, and straighted out. plus i chopped out some of the bumper core and pinch weld at the back there. it was really crimpin my style. ill get you part numbers for the tips if you want. but it will take me a couple days as i need to get the shop that did it to go through their invoices, a month ago! lol

so now its quieter, in every sense. it doesnt sound as loud when i rev it up (im happier) and it doesnt rattle on the hitch or body. plus the bigger mufflers LOOK better IMO. lol im going back on saturday though because the left tip is crooked and doesnt stick out as far as the right one!! hahaha and the car was there till like 6 30 today!!
i was listening to howard stern radio and drinkin a beer in it while they did the pipes! haha most fun ive had in (the front seat of) my car!!

[pocket-rocket]

Probably Sofa's.

[z34gtp383]

rhedalert, what tip's are you talking about?

[Rhedalert]

May I ask where you found those tips? I've been looking for something along the lines of that for a while!

[z34gtp383]

exhaust

i agree, 3" is over kill.. infact my Turbo setup im running 2.5" mandrel. I would gain little to nothing going 3" even with my turbo.

ofcourse this will be a turbo setup, will see. it aint cheap, or i might even go stainless steel factory set up but with better muflers.

[RedZMonte]

i agree, 3" is over kill.. infact my Turbo setup im running 2.5" mandrel. I would gain little to nothing going 3" even with my turbo.

[pocket-rocket]

You will kill your low end torque (what low end there is anyways) if you run 3". The only reason for doing 3" on a mainly stock DOHC would be A. You are going turbo, or B. Bragging rights. If you have an auto, well you will be doing yourself more harm than good and should consider a good 2 1/2 mandrel bent exhaust instead. You can still get a really good sound out of a setup like this with the right mufflers and resonator.

[z34gtp383]

exhaust

LOL ok. so im sure a few people will laugh at me a little... but thats ok. so i have 2 1/4" pipe front to back, and a resonator somewhere in the middle, after the Y pipe in the rear it splits into two mufflers then two tips out the back.

however i dont have pictures yet, or video of how it sounds. lol later today i suppose.

sounds like a stock setup, my z34 s like that. but imma going with a 3 inch magnaflow from the engine to the cat, and 2-1/4 all the way back. now this aint stock. hehe,