External crank triggers

**bszopi** · 10-10-2005, 04:47 PM

Lol... oops... I keep thinking of mine, which had the magnets installed.

**Guest** · 10-11-2005, 02:02 AM

Originally posted by bszopi

Lol... oops... I keep thinking of mine, which had the magnets installed.

Yeah what ever happened to that project?

If you still have that ECM, would it run fuel only? as in a second injector bank?

**bszopi** · 10-11-2005, 05:59 AM

Got married and now she drives the car almost as much as I do... And with a 3yr old around, its kind of hard to find time to work on it. Not to mention we bought a house in July which we are basically completely remodelling. I really do intend to get back to it one of these days...

As far as fuel only, I'm not sure. Since its a full standalone, I don't think there is a way to turn off the ignition side of it.

**Guest** · 10-11-2005, 09:54 AM

Originally posted by bszopi

Got married and now she drives the car almost as much as I do... And with a 3yr old around, its kind of hard to find time to work on it. Not to mention we bought a house in July which we are basically completely remodelling. I really do intend to get back to it one of these days...

As far as fuel only, I'm not sure. Since its a full standalone, I don't think there is a way to turn off the ignition side of it.

Ahh cool, I couldn't remember if it was full control of ignition or not, it has been a few years since you started that project.

**geoffinbc** · 10-21-2005, 03:03 PM

Ok here she is all welded and painted.

Now to make a bracket for the sensor.

**donk_316** · 10-31-2005, 05:33 PM

Hey,
ok i read through this and i think this the answer to what i need.

I have a dohc block but mu crank doesnt have the reluctor ring. can i run this set up to fire up the DIS ran by a 7727/7730 ecm?

**geoffinbc** · 10-31-2005, 08:38 PM

Yea the ring above is the same notch spacing as the DIS wheel on stock cranks.

Why do you not have a reluctor wheel? Thats impossible on a 3.4L.. Are you using a 2.8L crank. Also if you have no wheel then you have an external balance crank. Or are you saying you have the wheel but no notches in it

**v6h.o.** · 10-31-2005, 08:41 PM

Donk has a rare as shit FORGED 2.8L crank. Does not have the DIS notches cut into it.

**donk_316** · 11-02-2005, 09:57 PM

So... are these for sale?

**geoffinbc** · 11-02-2005, 10:58 PM

Well I have made the one in the pic only. It only works for RWD.

I will get my hands on a FWD pulley/balancer and make a wheel for it aswell.

However I still need to fab brackets aswell.

**donk_316** · 11-03-2005, 02:30 PM

Do you have a price in mind yet?

**geoffinbc** · 11-03-2005, 09:04 PM

Well for the ring and bracket maybe $40 or so... I have 10 rings cut now for RWD pullies..

When I get around to making the one for FWD pullies I will cut 10 of them.. Then I have to make a bracket.

**donk_316** · 11-03-2005, 10:26 PM

Well...dont i need a "rwd" one? I dont know why you keep saying FWD vs RWD... cant be internal VS external balance...

Just confused a little here.

**geoffinbc** · 11-04-2005, 12:36 AM

Different accessory drives with different pullies.

The FWD pushrod cars have a balancer/pulley combo

RWD had a bolt on pulley.

External crank triggers

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment