Turbo specs

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • boostedrs
    replied
    there are 6 bolts on the back of the compressor cover(cold side) u take those off and the cover will lift off exsposing the compressor wheel.u measure across the small side then the large part of the blades.(top/bottom)
    to reaseemble just gently place the cover back on,as far as tq specs i always just snuged my bolts up with a reg wrench

    Leave a comment:


  • robertisaar
    replied
    seeing how i'm not an expert when it comes to turbos: inducer/exducer means exhaust and intake turbine blades, right?

    and what all will i have to take apart/reassemble if anything at all? and good numbers for how much i will have to torque the bolts to?

    Leave a comment:


  • ForcedFirebird
    replied
    Originally posted by robertisaar View Post
    my camera sucks so that won't happen. measured everything with dial calipers and it all seems to be right.
    What does the in/ex-ducer measure, if you don't mind my asking .

    Leave a comment:


  • robertisaar
    replied
    my camera sucks so that won't happen. measured everything with dial calipers and it all seems to be right.

    Leave a comment:


  • boostedrs
    replied
    not bad pretty fast actually considering u paid with a mo,
    pics?

    Leave a comment:


  • robertisaar
    replied
    it has arrived... in a beat up box(thanks a lot DHL) and the exhaust gaskets a little beat up but other than that it looks fine. they got little plasic covers over the inlet/outlets.

    Leave a comment:


  • ForcedFirebird
    replied
    Because the ebay turbo parts go by XS Power, lol.

    Leave a comment:


  • robertisaar
    replied
    Originally posted by boostedrs View Post
    u would be surprised, but alot of those ebay turbos are made form garrett and turbonetics parts,while others arent, but parts interchange between them all

    robert let me know how long it takes u to get that turbo shipped to u, im either going to be getting one from ebay, or directly from an xs-power rep that i know depending on how long shipping takes
    i had a money order in the mail before noon on the 30th, so i'll have to be sure to remember...i remember people telling me it usually takes 3 days to ship so however long it takes to get my money order to them + 3 days would be a good number

    Leave a comment:


  • robertisaar
    replied
    Originally posted by ForcedFirebird View Post


    What one did you get?
    T70(T61)

    whats with the , i kind of like the name, goes along with the naming system from the 60s/70s

    RS: Rally Sport
    SS: Super Sport
    XS: Excessive Sport
    XS isn't really true yet, but when i'm done with the car, it will be
    Last edited by robertisaar; 06-01-2007, 08:52 AM.

    Leave a comment:


  • ForcedFirebird
    replied
    Originally posted by boostedrs View Post
    yeah any time u change a turbine shaft/compressor wheel it shoudl be rebalanced. if rebuiling the turbo the compressor and turbine wheels should be reasembled in the orintation that they came apart in to keep things within balance
    I was under the impression that the comp wheel and turbine were balanced individually on the Garretts.

    Leave a comment:


  • boostedrs
    replied
    Originally posted by ForcedFirebird View Post
    But be aware that Garrett parts are neutrally balanced, the ebay ones are balanced as a unit.

    This means if you use parts from two different mfgr's, it will have to be re-balanced. If you interchange Garrett parts for Garrett parts no balancing should be needed.
    yeah any time u change a turbine shaft/compressor wheel it shoudl be rebalanced. if rebuiling the turbo the compressor and turbine wheels should be reasembled in the orintation that they came apart in to keep things within balance

    Leave a comment:


  • ForcedFirebird
    replied
    Originally posted by boostedrs View Post
    u would be surprised, but alot of those ebay turbos are made form garrett and turbonetics parts,while others arent, but parts interchange between them all
    But be aware that Garrett parts are neutrally balanced, the ebay ones are balanced as a unit.

    This means if you use parts from two different mfgr's, it will have to be re-balanced. If you interchange Garrett parts for Garrett parts no balancing should be needed.

    Leave a comment:


  • boostedrs
    replied
    Originally posted by sharkey View Post
    a buddy of mine was running a generic e-bay turbo from e-bay on his b18 swapped civic hatch. it lasted over a year at 15 psi before it started smoking. the best thing asbout it was it was such a close rip off of a garret that it could be completly rebuilt with garret parts.
    u would be surprised, but alot of those ebay turbos are made form garrett and turbonetics parts,while others arent, but parts interchange between them all

    robert let me know how long it takes u to get that turbo shipped to u, im either going to be getting one from ebay, or directly from an xs-power rep that i know depending on how long shipping takes

    Leave a comment:


  • ForcedFirebird
    replied
    Originally posted by robertisaar View Post
    order placed and payment sent: now introducing: The 1995 Monte Carlo XS


    What one did you get?

    Leave a comment:


  • robertisaar
    replied
    order placed and payment sent: now introducing: The 1995 Monte Carlo XS

    Leave a comment:

Working...