Selling stage II vortech supercharger

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • maggsmvp04
    • Feb 2008
    • 12

    #1

    Selling stage II vortech supercharger

    Hey everyone. I'm currently a member at gaownersclub.com and grandamgt.com. I've bought and sold things there before. I recently bought a stage 2 vortech supercharger from another user but never had the chance to install. Here is the thread with all the info on why I need to sell.



    Don't want to but I have no choice. Anyway, if you can't view the thread here is exactly what was listed by the user before I bought:


    VORTECH SUPERCHARGER KIT (STAGE-2)
    Gain is up to 80 HP and 75 ft/lbs of torque with 6-8PSI boost with Stage-1.
    Gain is significantly higher at 12-15PSI boost with Stage-2.

    Will Fit:
    97-04 Chevrolet Malibu 3.1 V6
    99-05 Pontiac Grand Am 3.4 V6
    99-04 Oldsmobile Alero 3.4 V6

    This is a Basically Brand New Supercharger kit with only 3,000 miles of use!

    This isn’t just the supercharger, but the complete kit, which includes:
    • V9 Vortech Charger unit
    • Updated DriveShaft
    • Stage-1 RSM Pulley 8 psi
    • Vortech Adjustable BOV
    • Battery relocation kit
    • All brackets, oil & feed lines and belt.
    • K&N cone filter.
    • Instruction Manual with installation instructions.
    • Parts bagged & Labeled
    • Everything you need to Run 13's on a stock car!

    Stage -2 Kit Includes
    • 28lb Delphi Injectors
    • Stage-2 RSM Pulley 12-15psi (Depending on your cars RPM)
    • Custom 3 inch Cold Air Intake that curves into the fender well from charger.

    Upgrades
    • Upgraded Abec 9(previous was Abec 5) bearings capable of 25psi. Brand new seals, rebuilt to new specifications.
    • Updated Driveshaft with new bearing and hardened Pins w/ grade 8 allen heads to secure the shaft to the charger. (Corrects sheared pins problem that stock RSM/ZSPEC Kit had.)
    • Gatorback Belt

    This kit has everything UPGRADED with the BUGS FULLY WORKED OUT!
    The store sells the kit here….
    Shop performance car parts online at PFYC.com! Explore aftermarket & OEM parts like camshafts, spoilers, turbos & more — shop now!


    It’s $4,400 + Shipping! Then Add another $1500 to have it fully rebuilt by Vortech with the new bearing. Add another $260 for the Pulley, and $100 for the intake & cost of injectors, + the cost of new hardware for the driveshaft. This is a $5,000+ Value!!!!! This is a once in a lifetime deal! You won’t find a better price anywhere!

    Stage 1 is perfect for stock car; Stage-2 is great when tuned correctly.

    I paid $2300 for the kit after bidding closed, but I'm taking all offers now and I'm willing to negotiate. Simple and fair I think
    Last edited by maggsmvp04; 02-11-2008, 03:59 PM.
  • onefastV6
    • Sep 2005
    • 880

    #2
    Take some actual pics of the kit and post them....
    2000 Grand Am GT
    2011 Chevy Impala

    "The world's best cam combined with a poor set of heads will produce an engine that's a dog. But bolt on a set of great heads even with a poor cam, and that engine will still make great power." ~John Lingenfelter

    Comment

    • maggsmvp04
      • Feb 2008
      • 12

      #3
      Originally posted by onefastV6 View Post
      Take some actual pics of the kit and post them....
      I will get them up after class today, which will be around 8:00 or 9:00 P.M.

      Comment

      • bszopi
        Site Coder
        • Apr 2000
        • 9183

        #4
        Is this John's old kit? Sure sounds like it...
        -Brad-
        89 Mustang : Future 60V6 Power

        Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

        Comment

        • maggsmvp04
          • Feb 2008
          • 12

          #5
          Originally posted by bszopi View Post
          Is this John's old kit? Sure sounds like it...
          Not sure, it could be. The guy I bought it from was ImpetuousRacer. He is a member at gaownersclub.com and grandamgt.com.

          Comment

          • zofo61
            Banned
            • Oct 2005
            • 436

            #6
            Good Luck....I have been sitting on this kit plus a butt load more for a year and a half..........a lot of people want it but no one wants to actually pay for it. If I still have it when my 3500 topend gets done I am going to put it back on and tune it and run it.

            Comment

            • maggsmvp04
              • Feb 2008
              • 12

              #7
              Originally posted by zofo61 View Post
              Good Luck....I have been sitting on this kit plus a butt load more for a year and a half..........a lot of people want it but no one wants to actually pay for it. If I still have it when my 3500 topend gets done I am going to put it back on and tune it and run it.
              Good luck as well. I kinda jumped the gun when I purchased this kit and then all this bad luck happened after. And for those who wanted pics, here they are.















              Comment

              • bszopi
                Site Coder
                • Apr 2000
                • 9183

                #8
                Ok, Impetuous Racer isn't John, but I know him. I actually remember when he bought this kit, but I can't remember who he bought it from...
                -Brad-
                89 Mustang : Future 60V6 Power

                Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

                Comment

                • maggsmvp04
                  • Feb 2008
                  • 12

                  #9
                  Originally posted by bszopi View Post
                  Ok, Impetuous Racer isn't John, but I know him. I actually remember when he bought this kit, but I can't remember who he bought it from...
                  I just remembered. I messaged Impetuous after I bought it and he told me the guy he bought it from was Shane. I have his contact info.

                  Comment

                  • zofo61
                    Banned
                    • Oct 2005
                    • 436

                    #10
                    Originally posted by maggsmvp04 View Post
                    I just remembered. I messaged Impetuous after I bought it and he told me the guy he bought it from was Shane. I have his contact info.
                    Isnt Shane the guy who had this odd predisposition for blowing shit up?

                    Comment

                    • maggsmvp04
                      • Feb 2008
                      • 12

                      #11
                      Originally posted by zofo61 View Post
                      Isnt Shane the guy who had this odd predisposition for blowing shit up?
                      Well apparently he wasn't careful. I think he tried running 15 psi.

                      Comment

                      • mfuller
                        Mr. Common Sense
                        • Nov 2003
                        • 374

                        #12
                        Yup, same guy. It can make good power, but needs to be tuned correctly.
                        Matt
                        2000 Oldsmobile Alero GLS sedan
                        3400/3500 hybrid, Diamond Racing forged pistons, Scat I-beams, TCE DRTC, ported heads, WOT Race cam, PAC 1518s, Manley valves, F40 6-speed with Quaife LSD

                        Comment

                        • khellendrosxs
                          • Mar 2007
                          • 13

                          #13
                          / One and the same.

                          Comment

                          • maggsmvp04
                            • Feb 2008
                            • 12

                            #14
                            Jdog, I sent you an email response.

                            Comment

                            • maggsmvp04
                              • Feb 2008
                              • 12

                              #15
                              feavs, PM sent.

                              Comment

                              Working...