Lots of 3.4 DOHC Parts Mostly 1996/97

[pocket-rocket]

I really don't need the whole rail. I just picked up a parts car and it has AIR. Do you have non AIR exhaust manifolds. Of course 96/96..

I don't believe any of the 96/97 cars came without AIR injection. I took the set I got on a set of heads and cut the injection tube 1/2 inch above the flare nut, pinched them some and welded them shut.


John, is the LS1 TB a direct bolt on to the 96/97 style intake?

[jmgtp]

What's email for paypal? I saw the slot and it's fine for me as I do the same thing to them. Saves me a little work.

Please send to johnmontauti@yahoo.com - I should be able to ship within a day or two of payment.

Thanks,
John

[jmgtp]

I really don't need the whole rail. I just picked up a parts car and it has AIR. Do you have non AIR exhaust manifolds. Of course 96/96..

Sorry I can't split the fuel line clip from the rail since that makes the rail useless. I don't have the exhaust manifolds.

[CNCguy]

What's email for paypal? I saw the slot and it's fine for me as I do the same thing to them. Saves me a little work.

[94GPGTP]

I really don't need the whole rail. I just picked up a parts car and it has AIR. Do you have non AIR exhaust manifolds. Of course 96/96..

[jmgtp]

CNCGuy... sorry for the delay. Shipping is $7 for a total of $32.

I want to be as honest as possible about the TB so I took some better pics. I realized there is something major that I did to it that I didn't realize at the time of original posting. That is I ground away the area beneath the IAC passage. The reason i did this is because I was mounting the TB to a flat plate that had only a 3" bore with no accommodations for an IAC passage above the throttle bore. By grinding away the area between the throttle bore and IAC this allowed the metered IAC air to pass into the bore area behind the TB plate. The below pics demonstrate the changes I made for the IAC passage. I ran it like this on my 3.4 for a few years before swapping a Northstar TB in.

If this is a problem for you I understand - I can knock $5 off the top if it is and you are still interested.

Thanks,
John

[jmgtp]

94GPGTP... yes there is a clip that attaches the lines to the rail. I can sell you the whole rail.

CNCguy - I can check on a shipping quote tomorrow for the TB.

[CNCguy]

How much to ship the LS1 TB to 45449?

[94GPGTP]

is there some sort of clip that hold the fuel lines to the fuel rail? These are some nice parts BTW..

[jmgtp]

Be sure to see the descriptions in the above post as there may be additional info.

96-97 3.4 DOHC Top End Set

$90 + shipping

96/97 3.4 DOHC Upper Intake Manifold/Plenum
sorry I didn't take a pic, it is pretty much identical to the one pictured above - just included the upper intake/plenum only. If you need a pic let me know I'll take one.
$25 + shipping

96/97 3.4 DOHC Throttle Arm (connects TB to Plenum)

$15 + shipping

96/97 3.4 DOHC Fuel Rail

$10 + shipping

96/97 3.4 DOHC Thermostat Housing w/ bleeder

$5 + shipping

96/97 EGR Valve

$5 + shipping

96/97 3.4 DOHC Plenum Gasket (New In Box) sorry the flash kinda washed it out. It is NIB Felpro

$5 + shipping

1991 3.4 DOHC Cam Gears, Lock Rings, Bolts

$10 + shipping

1991 3.4 DOHC Oil Valley Gasket - never used, new

$3 + shipping

1991 3.4 DOHC Lower Intake w/thermostat housing

$15 + shipping

NON 3.4 DOHC STUFF:

LS1 Throttlebody 75mm, Includes TPS and IAC
SOLD

3.1 MPFI Throttlebody

$5 + shipping

[jmgtp]

Hello All,
Here are some 3.4 DOHC (LQ1) parts for sale. Most are 96/97 but evertthing is labeled. I have clean feedback on the board and 100% on eBay (seller jmgtp). I prefer paypal.
Thanks,
John

Pics for all items will be in the following post.
If interested PM or post with your zip and I will get shipping quotes.

96-97 3.4 DOHC Top End Set
Includes: Upper Intake Manifold/Plenum, Throttle arm w/brake booster adapter, lower intake manifold, thermostat housing, fuel rail with FPR. Does not include throttlebody.
$90 + shipping

96/97 3.4 DOHC Upper Intake Manifold/Plenum
$25 + shipping

96/97 3.4 DOHC Throttle Arm (connects TB to Plenum)
$15 + shipping

96/97 3.4 DOHC Fuel Rail
does not include regulator
$10 + shipping

96/97 3.4 DOHC Thermostat Housing w/ bleeder
$5 + shipping

96/97 EGR Valve
I've never used it so I couldn't say if it works or not.
$5 + shipping

96/97 3.4 DOHC Plenum Gasket
$5 + shipping

1991 3.4 DOHC Cam Gears, Lock Rings, Bolts
Good shape.
$10 + shipping

1991 3.4 DOHC Oil Valley Gasket
$3 + shipping

1991 3.4 DOHC Lower Intake w/thermostat housing
the runners have been sanded fairly smooth. Enough to get rid of the rough cast finish.
$15 + shipping

NON 3.4 DOHC STUFF:

LS1 Throttlebody 75mm, Includes TPS and IAC
SOLD

3.1 MPFI Throttlebody
needs new gasket for lower section and possible the securing bolts. If I can find the bolts I will include them.
$5 + shipping