FS - LX9 Parts

[1LoudCutty]

Decided to offload some of the parts from the TGP I got off Jonpro. I already have a low mileage LX9 ready for the car, so no use keeping his around. For anyone that knows, he had issues keeping headgaskets from burning and blowing. I found the issue was restrictive LG5 manifolds/xover and inadaquate exhaust DP. Sudden high combusion temps = burned HGs in a hurry

I ship via Fedex only and supply tracking numbers. Yes, I can ship to Canada as well.

-LX9 Heads - Nice shape. My straight edge says they arent warped. However, with any aluminum head, I recommend a shop decking them a couple thousandths to clean them up and make sure they are true before you bolt them on. $125 plus ship

-LX9 LIM - Nothing wrong with it that I can tell $50 plus ship

-LG8 UIM - Has WOT-Tech EGR delete on it $40 plus ship

-LX9 Rockers - $40 plus ship

Short block is still intact. I can pull and sell anything anyone wants. AFAIK engine had no knock. Oil shows no signs of any metal shavings or anything.

-LX9 Crank - $50 plus ship

-LX9 Rods and Caps - $50 plus ship

-LX9 Pistons/Rings - looks nice and clean - $50 plus ship

Want more than one thing? I'll knock off a few bucks and shipping will go down a bit too.

Thanks!

-Bob

[1LoudCutty]

Bumpo


Nobody wants anything?

[03sleepr]

whats the casting number on the crank?

[1stockfan]

I'm interested in your heads an LIM. Are they still for sale? email me andydrew187@gmail.com Thanks!

[eckoxl]

got a 3500 uim?

[hookdonspeed]

i might be interested in the bottom end stuff... my motor may have just locked up gona findout this weekend...

[1LoudCutty]

Sorry for the late replies, been busy at work so I go home, eat and sleep

Dunno the casting numbers on the crank. The bottom end is still intact. Didnt want to rip it apart unless someone wanted to buy the parts.

eckoxl - I dont have a LX9 UIM on this engine, it has a 3100 UIM.

hookdonspeed - I think the crank may be spoke for. Not 100% sure yet.

[hookdonspeed]

ill take dibs on the pistons aslong as their in better shape then this...







pm me with paypal address.. it looks as if the crank/rods are good still.

[hookdonspeed]

would u be willng to seperate the heads? i may need one.... looks like the intake valve seats got a little crack in it.

[hookdonspeed]

*sigh* ok well nvm on that, i wish thats all i needed, my block is scored, didnt see it atfirst but can now, its def damaged

looks like ima need to find a whole engine now.

[1LoudCutty]

Well thats not good!!

At least getting an entire LX9 is still decently cheap enough.