Parts

[ihatemygrandamg]

Just some parts laying around. Mostly projects I was gonna work on.

3100 heads- $50 shipped

3.4 rwd uim-$25 shipped

3.4 rwd uim,the front tb opening and the intake neck was cut off to adapt a lt1 tb, also has the 3.4 sfi snaded down and the top of the manifold is polished- $20 shipped

ported 3400 uim with ported runners and the tb side opened up to 65mm- $160 shipped

3400 exhuast crossover pipe- $25 shipped

3400 lim- $50 shipped

99+ grand am radio bezel- $15 shipped

3400 rockers,pushrods,and lifters- SOLD

3400 alternator, only about 75 miles on it- SOLD

3400 MAF- SOLD

[86euro]

I want the MAF and the alt, depending on how it mounts (the alt)

[phaderus]

Can I have the radio bezel, and the wires harness to the heater?

[ihatemygrandamg]

The alternator has one bolt going into the pass side of the motor, and then there is a bolt and a stub with a nut back by the firewall. Its off a 99 grandam

What do you mean by wire harness to the heater? My hvac assembly is gone.

[Azrael]

Which rockers are they; the ones that use the older (96-02) M10 studs or the M8 (03+)?

[ihatemygrandamg]

Their off a 99

[fivepointhustla]

nvrmnd

[ihatemygrandamg]

check your pm's fivepoint

[strtrydr]

I would be interested in the 3400 UIM (TB opening @65mm.)

Can I get some pictures of the mani? I'll PM you my email.

[Spankdamonkey]

May I ask what year 3400 the LIM came off of? Is it threaded or press-in? I've been looking for a threaded one......

[Young Whitey]

What year are the heads?

[phaderus]

The alternator has one bolt going into the pass side of the motor, and then there is a bolt and a stub with a nut back by the firewall. Its off a 99 grandam

What do you mean by wire harness to the heater? My hvac assembly is gone.

sorry for the delay, I had a family memeber pass away and I lost track of things. I still want the radio bezel. I would like the wire from control panel nobs for the heater to the heater if you still have it.

[ihatemygrandamg]

I still have the radio bezel but the wires got damaged when removing the hvac assembly, sorry.

Pm me about the bezel if your interested.

[Young Whitey]

I sent a pm did you get it?

[ihatemygrandamg]

pm'd ya back