FS: NEW 75mm northstar throttle bodies w/sensors - $50 shipped

12 LEFT AND COUNTING! After that they're gone forever.

I don't expect them to last long... I may increase the price as they get rarer. You're looking at $600 worth of parts for $50 delivered.

Capitalism, sometimes I hate it.

[ryan.hess]

12 LEFT AND COUNTING! After that they're gone forever.

I don't expect them to last long... I may increase the price as they get rarer. You're looking at $600 worth of parts for $50 delivered.

[ryan.hess]

in very good shape.

Of course it is! It's new!

Glad you like it. If you know of anyone else who might want one, be sure to point 'em here

[96gaGT]

Received my TB today! Very well packaged and is in very good shape.

[kwhauck]

got mine today!!! thanks again!!!!

[ForcedFirebird]

Got the TB today! Sweet deal, this is going to be easier than I had origionally thought to adapt to my motor. Two thumbs up to ryan.hess!

[ryan.hess]

PM sent

[kwhauck]

I'll take one!!! where do I pay!!!

[ForcedFirebird]

You're the man! Do you accept paypal?

[ryan.hess]

The connector looks like this:

Pinout:
A- Coil A Low
B- Coil A High
C- Coil B High
D- Coil B Low

Which should be the same as a lot of GM IAC's, including the connector as well.

[ForcedFirebird]

I can even give you the pinout.

That would be fabulous!

[ryan.hess]

EDIT : Could you tell me if this TB has a selenoid or stepper type IAC and how many pins are on the IAC also? Thanx in advance.
-John

It is a stepper with 4 pins. It will work with most/all GM computers. I can even give you the pinout. I'm 90% sure it even uses the same connector as yours.

[ForcedFirebird]

Still a few left.

I'd probably think twice about putting it on a 2.8

Boosted 3.1 might be okay. It's going to be huge compared to stock, and to take advantage of it you'll basically have to redo the plenum...

btw Ben - you didn't tell me the G6's, etc have electronic throttles!!

Basically that limits people to using those engines for swaps.......

Yes, I figured the bore would be O.K., just haven't found out if the sensors are compatable to my ECM.

EDIT : Could you tell me if this TB has a selenoid or stepper type IAC and how many pins are on the IAC also? Thanx in advance.
-John

[ryan.hess]

Still a few left.

I'd probably think twice about putting it on a 2.8

Boosted 3.1 might be okay. It's going to be huge compared to stock, and to take advantage of it you'll basically have to redo the plenum...

btw Ben - you didn't tell me the G6's, etc have electronic throttles!!

Basically that limits people to using those engines for swaps.......

[OldSkoolGP]

I'll take one too. I'm getting a new intake arm made for my 3.4.