Bin for 3.4pr with $58 or $59 code

[cfoss]

Hi all. I'm getting a 7730 together which will end up having a turbo and big injectors.

Anyone have a bin which could serve as a starting place? I want to stick with the dist. so 58/59 is where to go I guess.


Thanks,

Chay

[robertisaar]

six_shooter's BIN is a decent place to start... i don't think he's on this forum though.

[Guest]

I am on this forum actually, I just don't post here much... ... And go by a different UN. lol

The bin of mine that is posted on the code59 site in the download section is VERY old, and didn't have a whole lot of tuning done by the time the request was made to post up my bin. It is a dizzy bin, the DIS bin that I posted is in the Bins forum.

I would actually suggest you start with one of the 4 starter bins and tune off that. Just follow the suggestion on $59, and you should be up, running and drivable in just a few minutes.
When I got my Datsun running on $59, I was driving it with the F28 table adjusted for a decent idle AFR, then some small tweaks to the VE table to get it to rev under load. I then went out for a cruise for a few hours later that same night, making some tweaks, since I had to drive the car an hour each way to a car show, it was really rather easy.

[cfoss]

Thanks for the quick replies.

I'll put some effort into the $59 site.

I've read the p4 document and some tuning stuff. I'm really looking forward to this!

Chay