OBDII conversion in progress.
Collapse
X
-
A wiring harness adapter would be cool but you'd still have to add some new wiring for things like the MAF sensor, which were't used with OBD 1.5.
I'm trying to put together a sort of check list of things needed for such a swap. Might make a for a good article on this site. But I'll leave a proper DIY guide to someone more experienced in the matter.
Leave a comment:
-
well if there is some kind of adapter to use a 95 obd 1.5 harness on a 96 computer, thats what I would like to get.
Leave a comment:
-
what two harnesses? You mean interior harness to exterior harness?
Leave a comment:
-
I hear the 98 to 99 monte/lumina computer/wiring harnesses is the best way to go. Infact I'm having Brian Teel wire my 95 Grand Prix 3100 4t60e harness to a 98/99 monte/lumina harness.
It can be done and he has done it. Check out www.motorswap.org. He charges $300 to wire the 2 harnesses to together. He is also rewiring my injectors for l67 injectors.
Leave a comment:
-
I may go to the yard this weekend I'll see what I can come up with.
Leave a comment:
-
if it's anything like my car's running, it won't start easy when cold, and it'll idle like hell (major lope) of course believe it or not, my OBD1 3100 PCM handled this engine better at idle than the OBD2 3400 PCM. So it really depends.
Yes, I'd order the DHP now if I were you.
I think if the PCM is the same, then the pinouts *should* be the same too. So far I have run w-body, H-body and minivan PCM's (of '96-97) on the same harness with nothing to modify.
I just did a quick search on car-part.com for a '96 Beretta PCM, and everything GM's are coming up, so they are interchangeable.
Leave a comment:
-
Here is the pinouts for a 97 cutlass, It will probably load slow.
Any particular GM vehicles you would like, I will add them on request.
Leave a comment:
-
So your saying I should order mine now if I want to see it in like 2 months... haha.
Do you have a pinout chart for the 97 cutlass ecm so I can compare it to a 96 beretta. just the body style alone may have different pinouts. My ecm is at home so I dont know the number on it right now.
And that cam has slightly longer duration compared to a stage 1 but less lift... I wonder how my stage 1 cam will run on a stock tune...
Leave a comment:
-
Valve timing- Int -7 BTDC, 37 ABDC; Exh 41BBDC, -3 ATDC
Lobe lift: Int: .288 , exh: .288
LSA: 112
Dur@.050: Int: 210, Exh: 218
Adv Dur: Int: 265, Exh: 273
I'm still waiting on my powertuner. They're a little slow, but Im in a hurry to get this engine under control, at idle at least.
Leave a comment:
-
Purge stuff wont throw a code anyways, I had mine hooked up wrong and it didnt care really. Either way I grabbed everything since I wont have the DHP to tune it right away... It will have to run on a stock tune for a while and work right.
BTW whats your regrind specs if you dont mind me asking
Leave a comment:

Leave a comment: