If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
proceed to the Forums area and select the forum that you want to visit.
I have several 2.8 carb and TBI intakes, as well as the LIM from a 3.1 Camaro....they all have the splash shield. My guess is that all gen1 intakes had them.
Marty
'99 Z-28 - Weekend Driver
'98 Dodge Neon - Winter Beater
'84 X-11 - Time and Money Pit
'88 Fiero Formula - Bone stock for now
Quote of the week:
Originally posted by Aaron
This is why I don't build crappy headers. I'm not sure, I don't know too much about welding.
I have several 2.8 carb and TBI intakes, as well as the LIM from a 3.1 Camaro....they all have the splash shield. My guess is that all gen1 intakes had them.
Marty
my 3.4s don't have 'em I wanna find one with the shield in the junkyard to port for one of my 3.4's
3.4L intakes do not have them. They are way different underneath. But it does not need one. EGR gasses do not come through the intake. They come from a hose off one of the manifolds much like the Gen II and III engines.
i have a special oil splash sheild built for one of my GEN3 3400 LIM's just have to weld it in, then i can open it up as a full on "air gap" style manifold. :P
someday i'll finish it.
Colin
92 Sunbird GT, 3200 Hybrid 13.99@ 95.22 (2004)
90 Eagle Talon TSi AWD 10.54 @ 129mph.
Comment