3,4L LA1 engine in a s10 1991

[S10-Heizer]

can i get a LA1 engine in my s10 or only the older 3,4L engine which built until 95? i have a t5 transmission!


i hope you understand me,because i live in germany!

[geoffinbc]

Nope LA1 is a FWD motor. It is a no go, as far as drop ins are concerned.

[hotwater]

Where in Germany are you. I am in Germany too. Sorry to whore the thread...

[S10-Heizer]

Pirmasens south from Kaiserslautern (K´town)

what engine can i get in my s10?
the 3,4L from 95 out of a camaro?

[geoffinbc]

Yes 1993 to 1995. Or the GM crate motor.

Read this http://members.shaw.ca/betterthanyou...ine%20swap.htm

[S10-Heizer]

what 3,4L engine have you in your sonoma?

[geoffinbc]

A 1995 Camaro motor.

[S10-Heizer]

and how fast is your s10 now!
can i use a chip or damage that my 3,4L engine?
what can i tune on this engine? because i want over 200HP!
does the engine hold out in the long term?
are the headers for 2,8L and 3,4L engines alike?

i write a shit english!

[geoffinbc]

The 3.4L from the Camaro is just like the 2.8L in the S-10. Only it has a bigger bore and stroke.

I am probabally making close to 200HP and it is ALOT faster than it was before.

[ezrollin]

Two hundred horsepower would be the practical limit for a normally aspirated[carb/ f.i.] stock longblock 3.4. You would be mainly be upgrading fuel induction,cam and exhaust and then ignition curve.I saw one that was said to make 200 hp with a compcams 268 and weber carbs. P.S. Your English is fine!

[S10-Heizer]

200HP and a 3,4L engine are very much the most people drive with 1,6L engines!
for 1L gas you must pay 1,20$!
that is very expensive in germany!

[S10-Heizer]

can i the header for the2,8L engine use for the 3,4L engine?

do you understand?

[ezrollin]

Can you use headers from a 2.8 engine on a 3.4 engine? Yes,if they both engines are from a rwd .

[S10-Heizer]

can i reach 200HP with header,chip and a crane cam from 1500-4500RPM?
need i more things to get 200HP or more?

can i swap my s10 with all parts from the 3,4L camaro or need i parts from the 2,8L engine?i want drive the 3,4L engine without 2,8L parts!