aftermarket pistons for 3100

[93grandprixse]

i need aftermarket pistons for the 3100, i cant find any, have been searching for days, i want at least some good hyperutectics, id love to have forged, but i cant find any for a decent price... the only ones iv found id have to custom order

[3400-95-Modified]

Umm Sealed power pistons aka Federal Mogul... Affordable Hyperutectics and teflon side skirt coating.

http://store.summitracing.com/egnsearch.asp?SearchType=Engine&N=700+4294908216+4294840048+4294819990+4294924653+115+400298

The part numbers varry by overbore... mine I have are H847CP75MM

$26 a slug... not too shabby

My bad those are 3400's

Hold on

[3400-95-Modified]

Rock Auto 3100 Grand Prix SE pistons.

http://www.rockauto.com/catalog/raframecatalog.php?carcode=1255878&parttype=5620

[bszopi]

Any forged pistons for the 60V6 engines are going to be custom.

[3400-95-Modified]

And cost an arm and a leg.

[93grandprixse]

i figure im just going to spend the 1000 on Ross pistons, have the wrist pin size be the same as a small block chevy and use some small journal eagle h beams so i can utilize full floating pins...

[3400-95-Modified]

Whats the benefit to full floating pins over our pressed in ones?

And will Eagle H beams be the proper length?

[93grandprixse]

the rods are the same length as a small black chevy and full floating wrist pins are purly for performance and rotating friction reduction