Will 3.4 injectors from a push rod 3.4 work well on a hybrid 3.1 with a Crane 2030 with stock heads and exhaust (Fiero) and 56mm TBI?
-
'86 S10 Blazer 4WD, '87 2.8 with 3.1 crank and pistons, A.R.I. "Stage 2 Cam", Iron Heads with stiffer springs, Holley TBI, Manifold bored to fit the TBI Base(4.3 size), Fiero Covers, MSD Coil, DynoMax Muffler and 2.5 Tailpipe, no cat, Auburn Limited Slip, 3.73 final Drive. 700R. '85 Fiero GT 3.4 Hybrid, relieved top intake and exhaust, 57mm TB, Auto. 3.06 final drive. -
the 19# injectors should be fine, just have to tune for them...
-
This search-able HTML EFI database can provide very precise information for comparing performance and characteristic issues between them. The data are arranged in Alphabetical Order and searching is a snap via the opening page instructions. Hope this is helpful:
Last edited by 60dgrzbelow0; 12-11-2009, 02:43 PM.Comment
-
Bob your so useful!
aside: Bob, did you get my latest email?
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.comComment
-
When you state "tune for them" what do you mean exactly? And would the 2.8 injectors work just as well?
(Thanks for the reply)Last edited by Ray Hamilton; 12-05-2009, 12:40 PM.'86 S10 Blazer 4WD, '87 2.8 with 3.1 crank and pistons, A.R.I. "Stage 2 Cam", Iron Heads with stiffer springs, Holley TBI, Manifold bored to fit the TBI Base(4.3 size), Fiero Covers, MSD Coil, DynoMax Muffler and 2.5 Tailpipe, no cat, Auburn Limited Slip, 3.73 final Drive. 700R. '85 Fiero GT 3.4 Hybrid, relieved top intake and exhaust, 57mm TB, Auto. 3.06 final drive.Comment
Comment