3100/3400 cam question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • BumpNgrind777
    • Apr 2011
    • 10
    #1

    3100/3400 cam question

    What I am wondering if these crane cams will work with my motor. Its a 3100 with 3400 top end, port and polished gasket matching, 2.5in custom downpipe stock manifolds, and a custom tune and willing to retune after cam. This is also in a short track race car for race usage only.

    http://www.ebay.com/itm/Crane-Cams-H...item20cdfbe06c

    http://www.ebay.com/itm/Crane-Cams-H...item460ad88e06
    Tags: None
    • 3400-95-Modified
      The Pink Car
      • Dec 2005
      • 4375
      #2
      Basically no... Those cams are flat tappet camshafts and the 3x00 is a roller cam. Only place to order those cams is Wot-tech.com

      Got Lope?
      3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
      Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
      Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
      12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

        Comment

        • BumpNgrind777
          • Apr 2011
          • 10
          #3
          That's what I thought but wanted to make sure. So which cam from wot tech do you think would be good for me? Most tracks are shorter. The car is ran in 1st gear shifts to 2nd here and there never sees 3rd so mainly I want that short distance quickness. So for what's been done is 3400 top end ported to match gaskets and polished, 3400 tb, 2.5 downpipe, custom tune ran on a wheel dyno, and a different torque converter. My plans this year are a cam stiffer springs in the heads and headers (hoping to make). My thoughts were the torque cam they offer. any input on cams, anything else I can do to bring more life to this motor without?

            Comment

            Previous template Next
            Working...