Offical Pushrod Length GEN3

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gpse3400
    • Oct 2003
    • 1460

    #1

    Offical Pushrod Length GEN3

    Need the stock length of the intake and exhaust pushrods for GEN3. Thanks!
    Lorenzo
    '11 DODGE Challenger R/ T Classic 57M6 Green with Envy "Giant Green Squid"
    '92 PONTIAC Grand Prix SE 34TDCM5 "Red Lobster"
  • geoffinbc
    Iron Head Enthusiast
    • Oct 2003
    • 5831

    #2
    This is from GM. This is not an official specification so someone needs to verify if they are bang on these measurements.

    ? The intake pushrods are identified with yellow stripes and are 5 3/4 inches long.

    ? Exhaust pushrods are identified with green stripes and are 6 inches long.
    1993 EXT. CAB, 3.4L V6 TBI, 5spd manual. Sonoma
    1990 4Door, 3.2L V6 TBI, 5spd manual. 4X4. Trooper
    Because... I am, CANADIAN

    Comment

    • gpse3400
      • Oct 2003
      • 1460

      #3
      I've confirmed it via GM tech manual at 5.75" Intake and 6" Exhaust. They are also literally a hair less than 5/16" or .312"(measured .311") diameter. Thank you.
      Lorenzo
      '11 DODGE Challenger R/ T Classic 57M6 Green with Envy "Giant Green Squid"
      '92 PONTIAC Grand Prix SE 34TDCM5 "Red Lobster"

      Comment

      Working...