V6 Help!

[2.8/3400 1985 Camaro]

3.0? sounds like a bowtie block or something. maybe a dangerously bored 2.8L. as far as 350 (early "small journal") rods, they require modification to fit correctly, so its up to you which ones to start with. steel, iron, aluminum, blah blah...

There is no 60/6 3.0L.....that much is correct, but the block could definitely be bored to 3.0, just consider this....a 3.1L is a stroked 2.8, and a 3.4 is a bored 3.1, and they all use the same block, so considering that, its good for at least .3l displacement gain from bore.....

[bszopi]

a 3.4 is a bored 3.1, and they all use the same block

Not true. The 3.4 block has more meat on it to allow for the larger bore size.

[AaronGTR]

...and this thread is over 4 years old. I'm sure this guy has either finished this project already, or decided not to do it and moved on. I don't think he needed any more input.

[RedBird]

ha. no wonder nobody said anything about 2.8 internals in a 3x00 block LOL.

[60dgrzbelow0]

You never heard of it??
...many use it here were I'm from...
...I'ts not usally for street use... but has been coming more and more on streetcars... stabilizes the cylinders when the block get more volume tah org. also with turbo use...

Hmmm... Maybe the Guy is a REAL Swede....you know......From Sweden...a REAL 'Svenske'.... and in Sweden... Keeping their Engine Blocks from Over-Heating is the LEAST of their problems... then again...they don't call Swedes "Square Heads" for nuthin'... Maybe the Swedes get that nickname because the also fill their "Heads" with 'concrete fill' as well as their " Blocks"... LOL

But who am I to talk...me....another Square Head Norwegian... LOL... How does it go?

"Ten Thousand Swedes... Ran through the Weeds.... (Chased by One (1) Norwegian)

[60dgrzbelow0]

But seriously... All Kidding Aside...Before you do anything yet...Do yourself a favor and go here...

http://wot-tech.com/shop/

If ANYBODY can point you in the right direction to get this rocket off the launch pad... Ben can....

[bszopi]

But seriously... All Kidding Aside...Before you do anything yet...Do yourself a favor and go here...

http://wot-tech.com/shop/

If ANYBODY can point you in the right direction to get this rocket off the launch pad... Ben can....

I hope you aren't giving advice to the Swede, as his last activity on here was 01-12-2007 06:21 PM...

[60dgrzbelow0]

I have just GOT to get me a NEW calendar this year... LOL ... I'm still trying to figure out how this popped up as a current thread... Hmmm... Stage 1 of Senility: New Calendar! Sorry about that!

[bszopi]

Because 2.8/3400 1985 Camaro replied to it...

[60dgrzbelow0]

Hmmmm... Well most people don't know how hard it is for Square Heads like me to get it packed up inside my Hinee... But I DO manage to do it from time to time...