Header flanges? (Now ready for Sale!!!)

[Quintin66]

Well...... i guess if they're already made.....


$75, and how much shipping? Give me a total in U.S. dollars.

[geoffinbc]

1/2" is honestly excessive. You wont warp 3/8" thats for sure. Oh and it is 316 Alloy

[Quintin66]

yeah,...The individuals I made, with they're sleeker profile even look huge on the heads. I've gotta look for turbos somewhere else. I did some in-depth research and the ones I were looking to buy were way to powerful for a Twin-Turbo set-up below 300hp. I'd like to get just a little less than 50% of stock hp out of them. What I'd really like to find is a set of T2's from a SAAB 9000.

[geoffinbc]

What are you putting that into. Also I see provisions for an electric water pump. Good looking front cover.

[geoffinbc]

Ok Quintin is not going to take the SS flanges so they are back on sale. Anyone want the first set of SS flanges??? They are sitting here looking all pretty waiting for a good home!

[Z2_4cams]

any chance you'll be making DOHC ones in the near future?

[geoffinbc]

Brad was going to see if he can get his hands on some heads. But if you have a drawing I can have em cut in 1 day.

Right now I dont have a drawing. I am currently churning up an iron head drawing.

[Quintin66]

Your right Geoff, electric water pump required. I got an EWP pump and controller from Australia made by Davies Craig. The cost was around $350, but out of a store here in the U.S. the price was $650. The car is an old Triumph Spitfire. Here's pic of it in it's approximate location, I was hoping to not have to cut a hole in the bonnet but I don't think I'm gonna get away with it.

[Quintin66]

From the picture you can see the sorry state of the body. I guess you could say I like to start with "Worst Case Scenario" challenges.

[Z2_4cams]

Brad was going to see if he can get his hands on some heads. But if you have a drawing I can have em cut in 1 day.

Right now I dont have a drawing. I am currently churning up an iron head drawing.

so you need an actual size drawing? I got a set of 96-97 heads sitting here in my apt :P

[geoffinbc]

Well PM Brad and see if he is willing to make a drawing. He is the CAD expert around here.

[geoffinbc]

Ok guys I have finished the iron head drawing. However I do not have a spare set of heads. If anyone does ahve a set would they mind test fitting a 10guage template for me? Whoever does this for me will get a free set of flanges when they are cut!

[RacerX11]

I have several sets of iron heads I could check them out for you. Let me know.

Marty

[1QUICKHATCH]

I have a couple of sets of iron heads here too!

[geoffinbc]

I got a local guy here who is willing to drive over with some heads. So I am gonna take his offer.

Thanks though. I will let everyone know when they are finished