Search Result

Collapse
97 results in 0.0191 seconds.
Keywords
Members
Tags
  •  

  • Status of Site

    Status of Site

    Ok, so it has been a really long time since I've posted any news, so I figure I would. Some of you may have noticed that we have had some intermittent downtime recently. I was trying to set up a development site so that I can doing coding and whatnot to the site and not affect the people browsing the site, as things don't always work the way you expect them to when coding. Needless to say, I ran into some snags, which resulted in some downtime for this site. I finally got it up and runn...
    Go to post

  • How to Re-New Your Cracked Dashboard

    How to Re-New Your Cracked Dashboard

    I searched the forum for any postings on this subject and drew a blank. Although this fix is related to any F-Body, I wanted to share it as a possible solution for anyone replacing their dried, crusty or shattered stock dashboard cover with a durable new cover and one that includes an inexpensive way to solve the lack of vent covers that most of these covers present with. Here is what you will need to do the job correctly and fast, too....: To avoid "a thousand words" that follow... here are th...
    Go to post

  • Cheap Strut Tower for 88-96 Grand Prix

    Cheap Strut Tower for 88-96 Grand Prix

    I found a cheap way to sure up the rear on 88 to 96 Grand Prix's. The front strut tower braces from 88-93 Cadillac De Ville will fit with slight mods. I think most of the full size gm cars from this time period have the same size brace. First take the ends off, it is two bolts for each side. I used a Dremel with a pack of cutting wheels from Walmart. I cut squares the length of the cutting wheels around the holes, meaning the size pre-use (they get smaller as you use them). Once you are done wi...
    Go to post

  • Gen 2 to Gen 3 Top-End Swap

    Gen 2 to Gen 3 Top-End Swap

    The 3100 and 3400 engines are called Gen 3, because they are the third generation pushrod 60V6 engines. The reason for the swap is simple. Flow and design, both of which the Gen 3 triumphs all previous generations. The iron heads don't have splayed valves, D shaped exhaust ports, or in some cases even the larger valves (1.42/1.72). The Gen 2 Aluminum head engines are the most popular to do this swap, but no matter what you start with, the same steps apply. The Gen 3 parts have D shaped exhaust po...
    Go to post

  • Complete 1995 GM 3.4L Engine Teardown and Rebuild Project

    Complete 1995 GM 3.4L Engine Teardown and Rebuild Project

    For the better part of a year, I have been fully engaged in the complete tear down and rebuild and performance upgrade of a 1995 GM L-32 3.4L OHV RWD V6 engine. I have been trying to faithfully document all phases of these procedures in digital photographs that I have saved for public consumption on the following image warehouse site: http://www.photobucket.com ...accessible to all by using my 60degreev6.com nickname of: 60dgrzbelow0 The deconstruction images show the poor condition of the e...
    Go to post

  • New Search System Installed

    New Search System Installed

    Well, I finally got fed up with not being able to find old threads with vb4's existing search system. Its something that has basically been broken since the software was released almost a year ago. Unfortunately, its taking them forever to get it working. There has been an alternate search system discussed over on vb.com for quite some time, but most people were recommending it only for larger forums (1+ million posts), so I really didn't think we needed it. Anyway, in the last few days, I've...
    Go to post

  • 4 Speed Automatic Transaxle Info

    4 Speed Automatic Transaxle Info

    The following pages contain information on specific transmission models from the 4T60, 4T60E and 4T65 family(4T40/4T45 and 4T80 information may be in the works, stay tuned). For now, it is NOT an all-inclusive list, but any missing information would be appreciated. Miscellania: 4T60E Differentials with an asterisk are "fine pitch" final drives. Sun gears, internal ring gears, and pinion gears are NOT interchangeable with other final drives. 4T65E with "IMS" have the newer type of s...
    Go to post

  • No Description of Part

    No Description of Part

    We're sorry, this part currently has no description to go along with it. We are working on trying to get as much information as available for each part as well can, but it will take some time.


    Go back the the 3x00 Exploded View
    Go to post

  • 3x00 Exploded View

    3x00 Exploded View

    Click on a number corresponding to the part you are looking for information on. This will load a new page with detailed information (part numbers, specifications, description, etc) for the part. This is a general breakdown of parts. With that said, there may be some parts not shown that are on a specific platform. There may also be some parts that are shown that are not on all platforms. Several items vary over the years as well, and any variances should be covered in the detailed description pa...
    Go to post

  • Setting up HPTuners for a 60V6 Engine

    Setting up HPTuners for a 60V6 Engine

    HPTuners is an OBDII scanning and programming suite that is currently being updated for better support to the 60V6 community. Before you begin tuning, it is important that your car is in the best physical condition possible.
    ...
    Go to post

  • 3900 Engine Specifications

    3900 Engine Specifications

    3900 Engine Mechanical Specifications Application Specification Metric English General Data Engine Type 60 degree V-6 Displacement 3.9L 238 cu in RPO LZ9 VIN 1 Bore 99 mm 3.90 in Stroke 84 mm 3.31 in Compression Ratio 9.8:1 Firing Order 123456 Sp...
    Go to post

  • New Chatbox on Forum Home

    New Chatbox on Forum Home

    I've decided to try one more chat option, since previous attempts haven't been the greatest. Anyway, it is a chatbox (shout box?) that is currently located at the bottom of the forum home page. And for a brief testing period, this is where I plan on leaving it. Depending on how the community uses it, there is the option to also show it in the forum areas, as well as the threads. An upcoming release will also allow me to place it on the CMS front page. But, as I said, I am currently just going...
    Go to post

  • 4T65E and 4T65E HD (99+) N-Body Swap

    4T65E and 4T65E HD (99+) N-Body Swap

    So you have significantly modded your engine and now your transmission seems to be the weak link of your build. You have a few options to upgrade the stock 4T45E transmission which can be rather costly, or you can swap to the stronger 4T65E series transmission which seems to be uncharted territory for many. The purpose of this article is to provide a little more insight on what it will take to swap a 4T65E transmission into your 99+ N-body. ...
    Go to post

  • Detailed Sensor Descriptions

    Detailed Sensor Descriptions

    Contents1 Knock Sensor (KS)2 Exhaust Gas Recirculation Valve (EGR) 3 Coolant Temperature Sensor (CTS) 4 Throttle Position Sensor (TPS) 5 Intake Air Control Valve (IAC) 6 CPC 7 Oxygen Sensor (O2) 8 Ignition Control Module (ICM) 9 Park/Neutral Switch 10 Power Steering Switch 11 Intake Air Temperature (IAT) / Mass Air Temperature (MAT) Sensor 12 Crank Sensor (CS) 13 Manifold Absolute Pressure Sensor (MAP) 14 Fuel Level Sensor 15 Oil Pressure Sensor 16 Oil Level Sensor Circuit 17 Vehicle Speed Sensor ...
    Go to post

  • EEPROM Code

    EEPROM Code

    Code is a language that computers or simple electronics understand, it serves as an instruction set to check what sensors are doing, and tells other electronic devices of the motor what to do and how to do it. For example, fueling and spark. "Code" what we refer to when tuning our ECU's, can be compared to as an ISO that is burnt to a CD. Or if you are not computer savvy, can be thought of, written letters and sentences on a piece of paper. The paper being the EEPROM and your writing as the code...
    Go to post
Working...