Underdrive pulley with damper for 3400

[3400-95-Modified]

The aluminum pulley's that did exist, had a steel sleeve pressed over the shaft already, and the seal was the same size as stock since the stock pulley is steel to begin with.

[bob442]

so far an aluminum pully with the wear issue:
when i did a timing chain on a 2.2, i got a steel sleeve and larger seal, so i would assume the same could be purchased for the 3400, if its not already the same as the 2.2 anyways.

[CNCguy]

Speaking from a manufacturers point of view, with the limited 60V6 marketplace, it is hard to justify the investment in design, tooling and inventory of a new product. When you add in the economy being slow and people spending less on their toys, new products will be far between.

[SappySE107]

Guess John didn't want to reply after all. He got the pulley back so its not gone forever. However, I have no news on a pulley being made and consider this dead.

[bszopi]

Re: Underdrive pulley with damper for 3400

Last I heard, they were having issues with the 24x ring, just like all the other companies...

Sent from my Devour using Tapatalk

[discostu]

So complete honesty here... Did I give away my FFP UDP for free for nothing?
It sounds like this project is DEAD... I would at least like my pulley back so I can sell it elsewhere, OR I would like some money for it.
I did not expect to never see it or progress on this again.

Can we still get an update on the underdrive damper pulley please?

[Superdave]

Yep, only the RSM and i think early FFP's.

my old FFP had it, never had any leaks.

[3400-95-Modified]

I also have a FFP pulley. This only effects the RSM pulley and possibly MRZ? Maybe someone else can confirm wheather or not the MRZ pulley has the steel hub.

MRZ has the insert. I spoke with him about this during his design phase and he incorported it. He originally wasn't going to till I spoke up in one of his threads on Bstuff IIRC.

[Nick-G]

they aluminum pulleys should have a steel sleeve on that part to prevent the wear. mine does (FFP).

I also have a FFP pulley. This only effects the RSM pulley and possibly MRZ? Maybe someone else can confirm wheather or not the MRZ pulley has the steel hub.

[torq455]

they aluminum pulleys should have a steel sleeve on that part to prevent the wear. mine does (FFP).

[Nick-G]

I'm hoping this idea hasn't died. Here is a good read for those of you using aluminum pulleys. http://grandamgt.com/forum/showthread.php?t=83221

[discostu]

Any update on these pullies?

[3400-95-Modified]

Thank you gectek

[gectek]

The problem with talking to a company that is half a world away, is the fact that they are half a world away. I send them an email, it takes at least a day before they read it and then maybe longer before they respond. I will try to find something out as soon as possible.

[3400-95-Modified]

So complete honesty here... Did I give away my FFP UDP for free for nothing?

It sounds like this project is DEAD... I would at least like my pulley back so I can sell it elsewhere, OR I would like some money for it.

I did not expect to never see it or progress on this again.