My Long Block Build is Complete!

[3400-95-Modified]

Not ragging... but damn what do you have done to the trans to be able to support all of this grunt...

[mfuller]

According to his site:

Engineered Performance 4T60E
EP LSD
Furnace braced TQ
3k stall
3.73 gears
Energy Suspension Transmission mount

[3400-95-Modified]

Ok, I couldnt remember if he was the one who got the EP 4t60e setup. I knew someone on here went through that and had a hard time getting it to him.

[blackbombshell95]

Ok, I couldnt remember if he was the one who got the EP 4t60e setup. I knew someone on here went through that and had a hard time getting it to him.

Ya. That was me . He took forever but his customers say his products are great. So hopefully I can give him that after it is running.

EP did a full perf rebuild. He mentioned he used lots of 4t65e parts. As for my N/A power that trans should be great. I'd imagine it should be fine for the few times I use nitrous with it.
I'm crossing my fingers I get 250whp n/a.

[ForcedFirebird]

I'm crossing my fingers I get 250whp n/a.

I'll be dissaopointed. I have a strong feeling it will be more...

[blackbombshell95]

I'll be dissaopointed. I have a strong feeling it will be more...

I really hope so. I put a lot of money into it. But mostly to have a good solid engine that should give me years and years of fun. I really hope this doubleroller works out great. Since there is a lot of new ideas in this engine, i plan to do partial tear down inspections every 500 miles for the first 3k miles.

My engine builder has never done a high perf build like this on a 3400. But they knew i was paying extra $$ to have them check all my bases. Especially with the double roller kit. They did all my modifications including milling my timing cover.

Not only is the engine bay in pieces but currently I got the whole interior gutted and being restored. You can check out updates on this @ http://www.clubgp.com/newforum/tm.as...mode=1&smode=1 That thread has the history of my 95 grand prix.

Being updated in a daily basis is my current progress with the interior on page 2 and soon to be a page 3.

[blackbombshell95]

She runs as of may 21st!

Now will ben get off my back? lol. Probably when I get her on the dyno

[bszopi]

Almost 16 months to the day, since you last posted about it. About time...

Congrats though!

[geldartb]

holy jesus

Congrats on finishing. so where is the video

EDIT i just remembered you got the same cam i did. you will like it. here is what mine sounds like http://s60.photobucket.com/albums/h5...rent=015-2.flv

[mfuller]

Looks really good Corey.
Looking forward to seeing the video and hearing it run.

Picture is here:

http://i99.photobucket.com/albums/l314/blackbombshell95/95%20Grand%20Prix%20Engine%

[geldartb]

Looks really good Corey.
Looking forward to seeing the video and hearing it run.

Picture is here:
http://i99.photobucket.com/albums/l3...Prix%20Engine%

no pic there its been moved

[mfuller]

Helps to copy the entire link. I'm a dunderhead.

[3400-95-Modified]

Helps to copy the entire link. I'm a dunderhead.

Wow... I built my motor, ran it, put down a 13.996 N/A with a stock trans... then managed a cheap nitrous run for a 13.511 last year, and then took it all apart again and rebuilt it along with the trans and blew the trans first drive, and then rebuilt that again, and have been driving it for a about two weeks now and you JUST finished yours... LOL... Glad to see it's finally together.

Dyno time... After a tune of course.

Sad part is tho... By now some of the parts you used are probably "outdated" or have been replaced with better items... I kinda feel that way with the cam I choose in 07... Oh well.


I need intake clamps like that... those are hot

[geldartb]

Sad part is tho... By now some of the parts you used are probably "outdated" or have been replaced with better items... I kinda feel that way with the cam I choose in 07... Oh well.

yeah thats' how i feel with my cam. i bought my cam and then Ben got the new profiles. makes me want to buy a new cam, hmm maybe this winter.

[blackbombshell95]

Nothing is outdated as far as i'm concerned besides a 3500 engine . I did send back my intakes at one point for an update.