Announcement

Collapse
No announcement yet.

4 bolt mains

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ortie666
    replied
    I was thinking of using a FWD block, then mounting a reverse starter on the top back side of the bellhousing, kind of like those Quarter Master bell's used on latemodel stock cars.. Instead, I will be going with just a 3.4L also.. But still might do that so the starter quits getting heat soaked from the headers..

    Originally posted by chevette_boy View Post
    yea the holes will be splayed and positioned as per gm's blueprints. ill work on a price once i get a working set. Nice to see another chevette owner using the 6-60* its nice and light and very powerful
    Yeah, there fun cars to have V6's in and big tires on.. Kind of like a glorified Go-kart. I would like to see some other pictures of under the hood tho.
    Ohh, and I noticed ur from Manitoba, Im from Saskachewan, I think June there is a Drifting demo at the Brandon Airport I will be attending with atleast one of my cars

    Leave a comment:


  • chevette_boy
    replied
    Originally posted by ForcedFirebird View Post
    I'm interested in the outcome.

    Since my next motor is going to be a big-power twin turbo, I need all the help I can get since I want to see what a 3.1/3400 can really do.

    You could save yourself some dough by using a 3x00 block. The 3x00 block is actually stronger. A local has split a 3.4 block down the valley in a 300+hp N/A sprint car (I sold him a 3500 block ) running 14:1 SCR and a 6000rpm max.

    Nice job on the car, BTW.

    500-600 is also my goal as well, trying for 250whp N/A first.

    What compression/turbos/fuel are you using?
    id love to run a 3x00 block but its more work than its worth to make it fit in the car. i would like to make 500hp 600lbft this year which is not much more than i made last year. im running 8.8:1 compression, mitsubishi 13c turbos and 94 octane at 10 psi and 25% c14+ with the 94 @ 15 psi

    Leave a comment:


  • ForcedFirebird
    replied
    I'm interested in the outcome.

    Since my next motor is going to be a big-power twin turbo, I need all the help I can get since I want to see what a 3.1/3400 can really do.

    You could save yourself some dough by using a 3x00 block. The 3x00 block is actually stronger. A local has split a 3.4 block down the valley in a 300+hp N/A sprint car (I sold him a 3500 block ) running 14:1 SCR and a 6000rpm max.

    Nice job on the car, BTW.

    500-600 is also my goal as well, trying for 250whp N/A first.

    What compression/turbos/fuel are you using?

    Leave a comment:


  • chevette_boy
    replied
    Originally posted by Ortie666 View Post
    yeah, Im in.. Ill buy a set if the outer bolt holes were splayed a bit
    yea the holes will be splayed and positioned as per gm's blueprints. ill work on a price once i get a working set. Nice to see another chevette owner using the 6-60* its nice and light and very powerful
    Last edited by chevette_boy; 04-08-2008, 05:54 PM.

    Leave a comment:


  • Ortie666
    replied
    yeah, Im in.. Ill buy a set if the outer bolt holes were splayed a bit

    Leave a comment:


  • geoffinbc
    replied
    Well a SBC has smaller mains so a shop would have to machine the caps. But the bolt holes and stuff may pose a problem.

    Leave a comment:


  • chevette_boy
    replied
    Originally posted by betterthanyou View Post
    GM has 4 bolt caps on the aluminum Bowtie block. Maybe the caps are available separate or perhaps you could source a similar setup. Or a splayed small block cap might be able too be machined to work.
    the caps and block are discontinued and i have yet to find a cap that can be made to work

    Leave a comment:


  • geoffinbc
    replied
    GM has 4 bolt caps on the aluminum Bowtie block. Maybe the caps are available separate or perhaps you could source a similar setup. Or a splayed small block cap might be able too be machined to work.

    Leave a comment:


  • chevette_boy
    replied
    Originally posted by SappySE107 View Post
    Im not sure the oil pan on the 3400 allows for the 4 bolt main setup. I could be wrong but its crossbolted to the pan unlike the stamped steel pans.
    yea the caps would be for the rwd 2.8,3.1,3.4 and fwd 2.8,3.1. i heard of some ppl using ford caps before...any one hear know what caps may have been used

    Leave a comment:


  • Superdave
    replied
    i've seen your videos before, nice setup!

    yah, the FWD gen3 blocks have crossbolted mains.. i haven't heard of anyone having bearing issues related to power output with those.. still a good idea for the older blocks though.

    Leave a comment:


  • SappySE107
    replied
    Im not sure the oil pan on the 3400 allows for the 4 bolt main setup. I could be wrong but its crossbolted to the pan unlike the stamped steel pans.

    Leave a comment:


  • chevette_boy
    started a topic 4 bolt mains

    4 bolt mains

    Hello! im wondering if there is any interest in a 4 bolt main caps for #2 and 3 journals. I will be designing a set for myself with the related drill jig for a rwd block, im sure the caps will work on the fwd blocks as well. they will be a 4130 material and hopfully enable 6-700hp. I am currently running a twin turbo 3200 hybrid in my chevette, im making 387hp and 483lbft @ 10psi and 413hp and 539 lbft @ 15 psi at the crank and i am starting to stretch the 2&3 caps and take out the bearings. im gonna be building a 3500 hybrid off a 3.4 this year and hope to make 500hp & 600lbft (4 and 500 wheel respectively).
    heres the car:
    dyno:

    12.97@109 mph car will do 112mph still working on getting the power down.

Working...
X