ARP Head Stud Kit

[SappySE107]

http://60degreev6.com/store/index.ph...d&productId=69

Fits the 3100, 3400, and 3500 with the stock roller rockers. I have no test fit with gold race rockers yet or the gen 2 heads or gen 3 with non roller stock rockers.

Sale is good till the end of january. I will test fit the gold race rockers as soon as I can get to it

[SappySE107]

They clear the 1.6:1 gold race rockers using stock cam and pushrods.

[blackbombshell95]

Awesome. I'll be ordering mine on Monday.

[treeZ24]

just wanted to mention that i got my studs today.

thanks again ben! they look great, even came with assem lube

[SappySE107]

I forgot to add that to the listing but they will all come with the ARP assembly tube.

[OldSkoolGP]

Do they also come with the new tightening procedure? When you use their lube, you don't use the tightening procedure found in the service manual because you would severly overtighten the bolts if you did. The lube is that slippery.

[timg]

Do any of those fit the DOHC motors?

Tim

[SappySE107]

I need to post the torque spec for them but its about 70 pounds and no angle after that:P

I haven't put a kit together for the DOHC yet but I could with some measurements. Would be the same nuts and bolts with all the same length studs correct?

[timg]

When I tear into the 97 I have, I should be able to get you some measurements.

Tim