please help with my motor its driving me crazy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jturbo96
    • Aug 2009
    • 5

    #1

    please help with my motor its driving me crazy

    3.4 motor from a 94 lumina z34 put into a 86 fiero se ive replaced the coils, plugs, wire, fuel pressure reg, o2 sensor and other stuff that shouldnt matter. the car has verry little power and revs very slow, everynow and then i can hear it popping alittle and i can just smell the gass like its running realy rich
  • robertisaar
    W-Body for Life!
    • May 2007
    • 6414

    #2
    MAF? is it throwing any codes? and i know there isn't a whole lot of room for exhaust, but is there a cat there?
    1995 Monte Carlo LS 3100, 4T60E...for now, future plans include driving it until the wheels fall off!
    Latest nAst1 files here!
    Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

    Comment

    • jturbo96
      • Aug 2009
      • 5

      #3
      dont know about the codes i never wired the obd port, the one in my car was missing when in got it, no cat my exhaust is just a y pipe comming from the stock mani to 2 mufflers to the tips

      Comment

      • FerrariFan
        • Feb 2007
        • 54

        #4
        You need to wire the ALDL connector and take a look with a scan tool or laptop to see what is going on. It will be more expensive to start guessing and throwing parts at it. It might be as simple as miswired connector.

        Comment

        • robertisaar
          W-Body for Life!
          • May 2007
          • 6414

          #5
          ^X2, that will be the fastest/cheapest/easiest way to do it...
          1995 Monte Carlo LS 3100, 4T60E...for now, future plans include driving it until the wheels fall off!
          Latest nAst1 files here!
          Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

          Comment

          • jturbo96
            • Aug 2009
            • 5

            #6
            can u guys tell me how its suppost to be wired up?

            Comment

            • robertisaar
              W-Body for Life!
              • May 2007
              • 6414

              #7
              this enough or do you need more?
              Attached Files
              1995 Monte Carlo LS 3100, 4T60E...for now, future plans include driving it until the wheels fall off!
              Latest nAst1 files here!
              Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

              Comment

              • jturbo96
                • Aug 2009
                • 5

                #8
                you wouldnt happen to know what the pins are for the ecu would you? thats gonna help alot thanks

                Comment

                • robertisaar
                  W-Body for Life!
                  • May 2007
                  • 6414

                  #9
                  if you need diagrams from any 82-02 GM car, i've got them...

                  more?
                  Attached Files
                  1995 Monte Carlo LS 3100, 4T60E...for now, future plans include driving it until the wheels fall off!
                  Latest nAst1 files here!
                  Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

                  Comment

                  • pocket-rocket
                    Because stock sucks...
                    • Oct 2003
                    • 6252

                    #10
                    Maybe if the engine sat long enough, the injectors are sticking.
                    -60v6's 2nd Jon M.
                    91 Black Lumina Z34-5 speed
                    92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
                    94 Red Ford Ranger 2WD-5 speed
                    Originally posted by Jay Leno
                    Tires are cheap clutches...

                    Comment

                    • ghrarhg
                      • May 2005
                      • 215

                      #11
                      What ECM/bin file are you using to run it?

                      Comment

                      • jturbo96
                        • Aug 2009
                        • 5

                        #12
                        i cleaned the injectors and sinister performance did my chip. not the damn thing barly runs and i cant get it to start. it use to run better than this

                        Comment

                        • robertisaar
                          W-Body for Life!
                          • May 2007
                          • 6414

                          #13
                          i would suggest staying with a board member's chips(ben included) since we know our engines better than anybody.... as far as it not running: do you need to give it a little bit of throttle to fire, then let off and it idles by itself? if so, thats somewhat normal after changing a chip. after a few start cycles, the ECM learns the correct position for the IAC and it should start fine. if not, SP should be getting a call from you, asking why they sold you something worse than stock...
                          1995 Monte Carlo LS 3100, 4T60E...for now, future plans include driving it until the wheels fall off!
                          Latest nAst1 files here!
                          Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

                          Comment

                          Working...