what do you guys use for them????
-
The Official Rotating Mass Nazi -
-Brad-
89 Mustang : Future 60V6 Power
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog -
What he said. I just took one of the bellhousing bolts and one of the stands arms to Home Depot and Lowes until I found some that fit.
I got the BIG engine stand so it needed longer bolts than a normal stand.Taylor
1988 Olds Cutlass Supreme 3100 MPFI
1990 Pontiac Grand Prix STE 3.1 MPFI
1994 Olds Cutlass Supreme convertible
1998 Lincoln Mark VIII
"find something simple and complicate it"
Comment
-
i went to lowes as well but my bellhousing bolt was m12 1.5 but they only had 4 inch bolts. which is the length of the engine stand bracket, i need at least 5.5 inch or better.
lowes did not have any for me. anywhere else i can go? home depot doesn't even carry metric bolts.The Official Rotating Mass NaziComment
-
i got mine from a local bolt company.. 12mm x 1.75 pitch. around 3" long or so... they worked perfect.Comment
-
+1 on the bolt company. Locally we have a place called "Broward Bolt and Fastner" most areas have one. If you can find an ACE (or mom and pop) hardware, they usually will have a better selection.Comment
Comment