Need a taller ladder 
-
-
haha slightly nice organization though, i need to do some shelving myself.Originally posted by ForcedFirebird View PostNeed a taller ladder
i need a bigger ladder myself. my current one is about 6' short of me reaching the lights on the ceiling.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
I have to put my 6' ladder in the bed of my truck to reach my motion light to change the flood lamp bulbs when one burns out...Originally posted by geldartb View Post-60v6's 2nd Jon M.
91 Black Lumina Z34-5 speed
92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
94 Red Ford Ranger 2WD-5 speed
Originally posted by Jay Leno
Comment
-
i thought about using the roof of the subaru and standing on that but i'm not really sure on how strong the middle of the roof is.Originally posted by pocket-rocket View Post
when i first got it setup we used a 12' ladder and that stood a few inches above the lights when it was set up so you could use it. crappy thing is the lights are 3-3.5' away from the wall so you can't use a ladder that you lean against the wall to change them plus they are the 8' bulbs.
i tried the putting a ladder up on something or using a stack of tall objects to try and change one light but the whole setup was way too sketchy/shaky. plus changing one light isn't worth me eating concrete.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
-
nice looks good so farsigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
Holy-crap-moley!
Took the breaker panel cover off, and guess what? Three power legs and a neutral. For the n00bs, that means we have three phase electric FTMFW!!!!!Comment
-
You didn't know that before you moved in? Is it 240v/3ph or 208v/3ph?-Brad-
89 Mustang : Future 60V6 Power
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blogComment
-
we never pulled the cover to know. Ill stick my tongue to it and tell you if its 208 or 240.Ben
60DegreeV6.com
WOT-Tech.comComment
-
Pics and video or ban!Originally posted by SappySE107 View Post-60v6's 2nd Jon M.
91 Black Lumina Z34-5 speed
92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
94 Red Ford Ranger 2WD-5 speed
Originally posted by Jay LenoComment
-
-
We still have lot of cleaning to do, air lines to run etc, but here's where we are...
Comment
-
lift works flawless all the way up now
This shop space is really nice.
Ben
60DegreeV6.com
WOT-Tech.comComment
-
If you can see the transformer bank (assuming its a pole mount), 208v/3ph will have 3 equally sized transformers. 240v/3ph will have 1 transformer in the back larger than the others. If you have the cover off, you can also measure phase to phase with a multimeter. Or, if you have a 2-pole receptacle, you can measure across the legs there.-Brad-
89 Mustang : Future 60V6 Power
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blogComment
-
looks like you guys should have everything orginized in a day or so lol.
I'm gonna have to splurge and ask, Hows the Maro coming?Comment
Comment