You might be a 60v6 enthusiast if...

[bszopi]

If you buy a Mustang roller to eventually install a 60V6, you just might be a 60V6 enthusiast...

[robertisaar]

If you buy a Mustang roller to eventually install a 60V6, you just might be a 60V6 enthusiast...

i have failed to find this build thread and i am VERY interested...

[bszopi]

I just finalized the deal today, and don't even have the car in my possession yet. But I will post up some pics hopefully before I go to bed tonight. Its a long term project, so don't expect any real progress in the next year or 2...

[SappySE107]

I hear its going to have a 2.8 iron head with 4 turbos on one box. Also something about a grill for a hood scoop. These are just rumors.

[bszopi]

http://60degreev6.com/forum/garage_v...vehicle&id=353

Yeah, bitches...

[SofaKingWeToddDid]

looks very nice! cant wait to see SOMETHING under the hood. i dont hate ford engines BTW

[robertisaar]

proposed motor:

http://www.squirrelpf.com/turbocalc/index.php?version=4&target_peak_power=525&pr_ref=14.696&engine_disp=3.9&engine_disp_factor=0&target_af=11&bfsc=0.47&max_ic_loss=1.5&rpm_redline=6000&rpm_peak_power=5200&rpm_max_boost=4000&rpm_min_boost=3000&vol_1=90&vol_2=91&vol_3=88&vol_4=87&vol_1=90&vol_2=91&vol_3=88&vol_4=87&intake_temp_1=90&intake_temp_2=120&intake_temp_3=135&intake_temp_4=140&turbo_n=2&map_sel0=58

18psi is reasonable.... right?

twin hairdryers on a 3900 making ~525HP.... and an unknown amount of torque... guess that cage would be put to use!

looking good though.

[bszopi]

I was thinking 3500 with twin turbos, but Ben recommended just going with a single... We'll put something together though. And yeah, its gotta be something with some power since the cage is already there.

[robertisaar]

I was thinking 3500 with twin turbos, but Ben recommended just going with a single... We'll put something together though. And yeah, its gotta be something with some power since the cage is already there.

a Ford powered by a GM motor... how poetic.

it was tough narrowing down to a good twin setup for a 3900... 3500 might take more clever thinking... but a single would be simpler...

i'm definitely waiting to hit the subscribe button when this build comes up....

[pocket-rocket]

I think "Built Ford Tough With Chevy Stuff" sums it up.


You might be a 60v6 enthusiast if you think "Built Ford Tough With Chevy Stuff" would make a good sticker on Brads new car.

[SofaKingWeToddDid]

Built Ford tough, like a rock? you should put a chevy logo on it though instead of a pony or oval. screw the oval.

[geldartb]

also, if you have gen2 plenums screwed to your garage wall

guilty on that account but its hanging in my bedroom and its my old 3400 one.

If you buy a Mustang roller to eventually install a 60V6, you just might be a 60V6 enthusiast...

i knew there was something behind your avatar.

[SappySE107]

Well I was saying camaro V6, but that wouldn't be the easiest to swap. Still, direct injection 3.6 DOHC with boost? That would give you plenty of reason to own a cage

[FastZ34Lumina5]

Gentlemen I am guilty on many of the accounts above. This is great. How about this one.
when you are driving 1991 Z34 Lumina 5 speed and you come to a lite and a Honda rolls up next to you and starts revving his rice burner. And when the light turns green you just leave him in the dust. Then when you stop someplace and he follows you to ask you what kind of car this is and what’s under the hood. You look at him and say under the hood. My motor has the same amount of cams as you have pistons. then you realize that the car you are driving is older then the punk driving the Honda. the looks are priceless. 60dergeeV6 power all the way.

[pocket-rocket]

My motor has the same amount of cams as you have pistons.

Technically your engine has 5 cams, but one doesn't have lobes and its sole purpose is to turn your timing belt and oil pump (because oil pumps are good ). I still like yours though