WTB 60deg V6 Hyd Roller Lifters

[19Cutlass94]

Ive got a set from a '96 3100 that Ill let go.

[Blazer406]

Here is a pic of the ones I have cleaned up..... one maybe more will have to be replaced due to the pitting you can see in my previous post.

The taller pair on the right by themselves.... are 3800 lifters.... same as 4.3L and the V8 hydraulic rollers.

The short ones are the ones I am after.

[Blazer406]

if 3500 ones will work i have a set ill let go for 40 shipped and u'll get all of them

I don't think they will work....

My research shows:

17120070 ( AC DELCO HL118 )

SHORT Conversion - OEM for 4 cyl & V6
2.230" x .842" GM Hydraulic Roller
2.2L/134 OHV 4 1994-03, 3.1L/189 OHV V6 1993-03, 3.4L/207 OHV V6 1996-03
GM 17102014, 17120070

AC Delco: HL118
Dana-Clevite: 213-1756
Eaton, SBI: VL138
Elgin: HL2270
Enginetech: L2270
Federal Mogul-Sealed Power: HT2270
Hylift Johnson-Topline: A-2270
Melling: JB2270
Moresa: HR376
Stanadyne: T0082
VTI: RL280


Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, S-Series - 2.2L 1994 - 2003

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, All Models - 3.4L 1996

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, All Models - 3.4L 1997 - 2003

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, Beretta, Corsica - 2.2L 1994 - 1996

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, All Models - 2.0L, 2.2L OHV 1994

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, All Models, Eng/Code J - 3.1L 2000 - 2001

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, 3.1L, 3.4L - 3.1L, 3.4L 1997 - 2003

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, Impala, Monte Carlo - 3.4L 2000 - 2003

Engine - Cylinder head & valves - Valve lifters
VALVE LIFTERS, 2.2L - 2.2L SOHC 1995 - 2002

[MY91GT(Z)]

if 3500 ones will work i have a set ill let go for 40 shipped and u'll get all of them

[Blazer406]

I need 1 or more hydraulic roller lifters from a 60 deg v6 for an experiment I am doing trying to convert my LC2 TurboBuick engine over to hydraulic roller using as many factory parts as I can.

I bought a set of lifters from a 2.8L in a core engine at the junkyard with spider and a spider from a 3800 for $20. One or two have some pitting and need replacement.

Let me know what you have.....

Here is a pic of the pitted roller.