Just searching for a 04 and smilar years 3500 upper intake. I may need to expand to this to get the full potential out of my engine/cam
-
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS -
It will defiantly help esp on the top end. Not many cheap on car-part right now.sigpic
New 2010 project (click image)
1994 3100 BERETTA. 200,000+ miles
16.0 1/4 mile when stock. Now ???
Original L82 Longblock with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
-
12579767
137 shipped from gmpartsdirect. carpart.com is 125 for the used ones.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
I saw some on car-part for $60 before shipping.sigpic New 2010 project (click image)
1994 3100 BERETTA. 200,000+ miles
16.0 1/4 mile when stock. Now ???
Original L82 Longblock with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
Comment
-
that was searching using the boston based region which searches like 7 states
MA,ME,NH,RI,VT,CT
I found one ahwile back for like 75 shipped should have bought it but back then i didnt know where i was going with the engine modding seen as how i only had one drivable car at the time
2006
Intake Manifold
Pontiac G6 3.5 A 3106 $60 Meyer Auto Recycling, Inc. USA-KS(Wichita) E-mail 1-800-838-3275 1-316-838-3261
found that one searching the whole USALast edited by geldartb; 05-02-2008, 04:28 PM.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
Yeah I always just find the cheapest on there cause anythings gotta be shipped anyways nothing is close enough for pick up for me. I think I paid $60 for mine originally with shipping it was 80 IIRC.sigpic New 2010 project (click image)
1994 3100 BERETTA. 200,000+ miles
16.0 1/4 mile when stock. Now ???
Original L82 Longblock with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
Comment
-
I have one $100. +SHipping
I dont know what this means but "ASS HATS" is funnyComment
-
Wow, for how much people are selling theirs for I should sell my ported/polished 1 for more
.
I got mine from car-part was 45 before shipping, 65 after. Then spent over 8 hours porting/polishing. That's with unlimited air supply.
You may or may not know 10 times what i do.
ASE Master certified. Just means I can take tests. GM ASEP Graduate.
95' Z26, ported/cammed 3400/3500, OBD2, 282, T3T4. Boxes almost all empty..Comment
-
WOW I guess I got suckered when I paid $150 for mine.........I dont know what this means but "ASS HATS" is funnyComment
-
8 hours! There aren't even runners in it. I dunno what you used but that is a lot of time for one of these manifolds.Ben
60DegreeV6.com
WOT-Tech.comComment
-
Haha, yeah. I like to take my time
. Was 8 hours with stopping occationally to do some actual work when cars would come in. Stupid tax season = no work in the dealership 
. I spent most of my time port matching, then awhile getting rid of the lip to make it more funnel shapped, then polishing, then spent a couple hours with a scotch brite wheel on the exterior of it. Bet I spent 10 hours all together after I was done... but that's because im kind of a perfectionist. Used a snap-on 90* die grinder with a carbite bit, then a polishing kit for the ports. Then green buffer wheels and scotch brite pads for the exterior. Prolly spent just an hour getting between the grooves on the top
But yeah, if you're still looking, just check out car-parts. Last time I was there i saw some around 60 + shipping so you're looking 80ish.Last edited by Z26-T; 05-11-2008, 07:48 PM.You may or may not know 10 times what i do.
ASE Master certified. Just means I can take tests. GM ASEP Graduate.
95' Z26, ported/cammed 3400/3500, OBD2, 282, T3T4. Boxes almost all empty..Comment
-
I got one for 90 shipped, thanks guys.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBSComment
Comment