problems with guages after chip

[will3387]

i have a 1990 beretta with 3.1 and i installed the chip from wot-tech and now my rpm, temp, and battery guages dont work. i do have the digital gauges so im not sure if they needed to do anything different to the chip or not. ive tried emailling them a couple of times but no replys yet, i would call but my cell is being stupid. i would appreciate all the help thanks in advanced.

[SappySE107]

Yup, it needs something different. I have not recieved any emails from you. I sent you a pm. The digital dash uses information from the ALDL data stream to display. I will have to use the 1990 code instead of the 1994 code that I had modified for your application. I will add the option on the site for the digital dash as well so I will know in the future.

[will3387]

not sure why u didnt get my emails, but i will try to get it in the mail by monday.

[SappySE107]

What email address are you using?

[will3387]

i used the contact us page on the wot-tech website.

[SappySE107]

Thanks, that part wasn't working anymore after the upgrade. I was still getting emails from a few people but I don't know how. The contact page is now working again