If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
proceed to the Forums area and select the forum that you want to visit.
Are the roller-rockers in the 60*v6 store a boltin
There is a thread about them on there. I had no problem with the 1.52 rockers but the 1.6 need the pushrod guides clearanced for the pushrod geometry. I also reused the stock nut and used a washer under it to make up the difference for the ball.
Comment