New cam arrived

[blackbombshell95]

Duration @ .050" intake 227 exhaust 233 @ .515 lift with 1.6 roller rockers

114 LSA 110 Centerline

Brand new Stock SOLID cam with a regrind

This will go in a 11:1 3400 with nitrous. Also equiped with the 60degv6 store heads/intakes/65mm TB

Thanks 60degreev6 aka Ben!

[Guest]

Whose lifters are you going to use?

[blackbombshell95]

Oh. Stock replacements. I got them from Rock auto for about $12 something each.

[Guest]

solid cam? what do you mean? you mean hydraulic?

[RacerX11]

solid cam? what do you mean? you mean hydraulic?

No, he means the cam is solid, not hollow. Lifters are hydraulic.

[blackbombshell95]

solid cam? what do you mean? you mean hydraulic?

lol. that's funny. My machine shop asked me the same question it confused me. Care to explain a hydraulic cam? Or is that what you call it?

I know the cam isn't hallow like racer was saying. But what does that mean shaun?

[bszopi]

A solid cam would use solid lifters, whereas a hydraulic cam uses hydraulic lifters. You can't inter-mix the 2. Therefore, if you plan on using standard lifters (ie, hydraulic lifters), then the cam would be refered to as a hydraulic cam.

[gectek]

[SappySE107]

Looking forward to your results with all this hardware

Can you scan or take a picture of the cam card.

[Superdave]

Nice!


I got my core the other day, sending it off to be ground this week.

[blackbombshell95]

Looking forward to your results with all this hardware

Can you scan or take a picture of the cam card.

The cam card looks like it was printed on a fax machine lol. I'll snap a picture. BEN GET ON MSN DUDE!!

[blackbombshell95]

Cam Card

http://img354.imageshack.us/img354/5638/camcardml6.jpg

[Superdave]

so.. why so much LSA?

Afraid of a little overlap?

[blackbombshell95]

Lots of nitrous

[AaronGTR]

so.. why so much LSA?

Afraid of a little overlap?

I asked him the same thing, lol. My boost cam only has 113 LSA.