Technical Theory : Plenum Design

**CNCguy** · 09-06-2004, 10:18 PM

Originally posted by 93vinx

can you measure the bolt holes for me?that is the spaces between them

Sorry that I didnt reply earlier. I will try to remember to bring home the bolt pattern tomorrow and post it for you.

**CNCguy** · 09-07-2004, 05:27 PM

Originally posted by 93vinx

can you measure the bolt holes for me?that is the spaces between them

Here are the dimensions as viewed looking at intake manifold.

**bszopi** · 03-03-2005, 07:05 PM

Decided to bring this topic back up (for a few days) since I just recieved more parts for the plenum from Marc.

This will allow me to mount my 62mm (and up to 66mm) TB to the 4" tube that will help form the main plenum area. Too bad I can't work on it right now since I'm stuck in an apartment.

Maybe in a few months I'll get started back up again and start to make some progress on it.

**RednBlack** · 03-03-2005, 08:17 PM

He does good work. Just noticed...What's up with the Walt Disney thing? :P

**bszopi** · 03-03-2005, 08:39 PM

I had just started a movie for my daughter (see cute pictures above) and her friend from downstairs... So that would be the TV and the start of Toy Story 2.

**CNCguy** · 03-08-2005, 07:01 PM

Originally posted by bszopi

Too bad I can't work on it right now since I'm stuck in an apartment.

Maybe in a few months I'll get started back up again and start to make some progress on it.

I have not made any progress on mine either. Between work, divorce, women and other projects, I have not had much time to devote to it. And perhaps I get too distracted as I am now working on a new design to make the UIM from carbon fiber. If it goes well, I may start to market them.

I jump around too much really and have way too many unfinished projects. On Sunday I decided to make some billet Oil Fill Caps. This is what they look like.

The problem is they look so nice it makes the motor look really bad.

I know... its only a 3100 in the pic. I engraved it for the next motor.

I will use one of the blank ones until I get the other motor finished.

**RednBlack** · 03-08-2005, 07:23 PM

Where is my 3.4 DOHC cap? :P Might not "chicken scratch" for you anymore.

**bszopi** · 03-08-2005, 07:40 PM

Very nice! You need to sell those as well.

**RednBlack** · 03-08-2005, 07:43 PM

Originally posted by bszopi

Very nice! You need to sell those as well.

**CNCguy** · 03-08-2005, 08:42 PM

Originally posted by RednBlackCutlass

Where is my 3.4 DOHC cap? :P Might not "chicken scratch" for you anymore.

I need a 3.4 Cap so I can see how it's made.... got one for me?

**kflo 93 gt** · 03-09-2005, 02:12 PM

Wow, this whole thread has a lot of really exciting ideas in it. I just wish I had the necessary tools to tackle something like this. Plus, those oil caps look amazing. CNCguy, any chance of a 3.1 cap? I'd gladly send you a cap for reference and whatever else you needed.

**CNCguy** · 03-09-2005, 08:43 PM

Originally posted by kflo 93 gt

Plus, those oil caps look amazing. CNCguy, any chance of a 3.1 cap? I'd gladly send you a cap for reference and whatever else you needed.

Thanks for the props. I have a 3.1 cap that I just measured from my sons car and made a print from it. Perhaps we can make some up within the next week or so. I will let everyone know if they work out ok. I am going to start a thread about Billet Oil Caps so keep an eye out for it. I did not mean to hijack Brads thread. Sorry Brad.

**geoffinbc** · 03-09-2005, 09:09 PM

You should make Fiero V-cover caps since no one makes a replacement anymore. I got 1 of 3 left in Canada a year or so ago.

**bszopi** · 03-09-2005, 09:21 PM

I don't mind...

**Quintin66** · 03-10-2005, 03:31 AM

One of those caps would look good on this.................

Technical Theory : Plenum Design

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment